Product Overview
The F-629226.TR1 is a single-row tapered roller bearing with boundary dimensions 25 mm bore × 52 mm outside diameter × 15 mm width. The “TR1” suffix in Schaeffler/FAG nomenclature denotes single-row tapered roller bearing construction. It is catalogued as an automotive transmission bearing(cuscinetti per trasmissioni per autoveicoli)and is designed to carry the combined radial and axial loads generated by the gear train in a transmission assembly. The bearing is supplied open(without integral seals) for lubrication by the transmission oil circuit.
Key Specifications
| Parameter | Value |
|---|---|
| Model | F-629226.TR1 |
| Type | Single-row tapered roller bearing |
| Bore(d) | 25 mm |
| Outside diameter(D) | 52 mm |
| Width(T) | 15 mm |
| Weight | Consult supplier(not published in accessible catalogues) |
| Rolling element material | GCr15 chrome steel |
| Seals | Open / no seals |
| Load direction | Radial and axial(combined) |
| HS Code | 8482200000(tapered roller bearings) |
| Application | Automotive transmission bearing |
Performance Features
-
Single-row tapered roller geometry:The conical raceways support combined radial and axial loads simultaneously, with axial capacity in one direction. The tapered design provides the stiffness required for gear-mesh loads in transmission service.
-
Open configuration for oil-circuit lubrication:No integral seals,the bearing relies on the transmission oil for lubrication and cooling, consistent with the wet-sump strategy of a gearbox.
-
GCr15 chrome steel construction:Rings and rollers are through-hardened for rolling-contact fatigue resistance under the cyclic loading of automotive transmission operation.
-
Automotive transmission-specific envelope:The 25 × 52 × 15 mm dimensions and the TR1 single-row tapered roller construction place this bearing in a class suited to gear shaft support positions where combined radial and thrust loads must be managed within a compact space.
Application
The F-629226.TR1 is used as an automotive transmission bearing. In service, it supports a gear shaft under the combined radial and axial loads generated by the transmission gear train. The 25 × 52 × 15 mm envelope and the open, oil-lubricated configuration are consistent with a direct-fit transmission service bearing. Replacement requires transmission disassembly and should follow the vehicle manufacturer’s procedure for shaft end-play and bearing preload adjustment.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















