Product Overview
The F-600845.07.TR1 is a single-row radial tapered roller bearing with boundary dimensions 40 mm × 68 mm × 15 mm. It is catalogued as an automatic transmission bearing, and product data also lists it for new-energy reducer differential applications. The bearing is manufactured from GCr15 chrome steel with a steel cage and is supplied open(without integral seals)for lubrication by the transmission or reducer oil circuit.
Key Specifications
| Parameter | Value |
|---|---|
| Model | F-600845.07.TR1 |
| Type | Radial tapered roller bearing, single row |
| Bore diameter(d) | 40 mm |
| Outside diameter(D) | 68 mm |
| Width(B/T) | 15 mm |
| Weight | Consult supplier(not published in accessible catalogues) |
| Bearing / roller material | GCr15 chrome steel |
| Cage | Steel cage |
| Seals | Open(no integral seals) |
| Load direction | Radial and axial(combined) |
| HS Code | 8482800000(other rolling bearings, including combined ball/roller bearings) |
| Application | Automatic transmission / new-energy reducer differential |
Performance Features
-
Single-row tapered roller geometry: Conical raceways support combined radial and axial loads, with axial capacity in one direction. The tapered design provides high stiffness under the gear-mesh loads encountered in transmission and reducer service.
-
GCr15 chrome steel construction: Rings and rollers are through-hardened for rolling-contact fatigue resistance under the cyclic loading of automotive drivetrain operation.
-
Steel cage: The steel cage provides robust roller retention and is suited to the oil-lubricated, potentially shock-loaded environment of a transmission or reducer.
-
Open configuration for oil-circuit lubrication: No integral seals,the bearing relies on the transmission or reducer oil for lubrication and cooling, consistent with the wet-sump strategy of these assemblies.
Application
The F-600845.07.TR1 is used as an automatic transmission bearing and is also listed for new-energy reducer differential positions. In these applications, it supports a gear shaft or differential component under the combined radial and axial loads generated by the gear train. The 40 × 68 × 15 mm envelope and the open, oil-lubricated configuration are consistent with a direct-fit drivetrain service bearing. Replacement requires transmission or reducer disassembly and should follow the vehicle manufacturer's procedure for shaft end-play and bearing preload adjustment.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















