Product Overview
The F-607039.TR1 is a single-row tapered roller bearing with boundary dimensions 25 mm bore × 53.5 mm outside diameter × 20.6 mm total width. It is produced to INA / Schaeffler FAG specification and is catalogued as a Ford manual transmission and differential bearing. The bearing uses a polyamide (nylon) cage and is supplied open (without integral seals) for lubrication by the transmission or differential oil circuit. It carries the Ford OE references 2129235 and H1BR-7A043-B3A, and the INA cross-reference 712 2347 10.
Key Specifications
| Parameter | Value |
|---|---|
| Model | F-607039.TR1 |
| Type | Single-row tapered roller bearing |
| Bore (d) | 25 mm |
| Outside diameter (D) | 53.5 mm |
| Total width (T) | 20.6 mm |
| Outer ring width (C) | 16.6 mm |
| Inner ring width (B) | 20.4 mm |
| Weight | ≈ 0.21 kg(published values range from 0.205 to 0.216 kg,confirm against actual batch) |
| Cage | Polyamide (nylon) cage |
| Seals | Open / no seals |
| Load direction | Radial and axial(combined) |
| HS Code | 8482200000(tapered roller bearings, including cone and cup assemblies) |
| OE references | FORD 2129235,FORD H1BR-7A043-B3A,INA 712 2347 10 |
Performance Features
-
Single-row tapered roller geometry: Conical raceways support combined radial and axial loads simultaneously, with axial capacity in one direction. The tapered design provides the stiffness required for gear-mesh loads in manual transmission and differential service.
-
Polyamide(nylon)cage: The nylon cage offers low friction and noise damping in the oil-lubricated environment of a transmission or differential, and contributes to the bearing's relatively light weight.
-
Open configuration for oil-circuit lubrication: No integral seals,the bearing relies on the transmission or differential oil for lubrication and cooling, consistent with the wet-sump strategy of these assemblies.
-
INA/Schaeffler FAG specification: Produced to the original equipment dimensional and material standard, with Ford OE cross-references confirming fitment in specific manual transmission and differential applications.
Application
The F-607039.TR1 is used as a manual transmission and differential bearing in Ford vehicle applications. In service, it supports a gear shaft or differential component under the combined radial and axial loads generated by the gear train. The 25 × 53.5 × 20.6 mm envelope and the open, oil-lubricated configuration are consistent with a direct-fit drivetrain service bearing. Replacement requires transmission or differential disassembly and should follow the vehicle manufacturer's procedure for shaft end-play and bearing preload adjustment.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















