Product Overview
The F-611420.02.SKL is a double-row angular contact ball bearing with boundary dimensions 35 mm bore × 76 mm outside diameter × 25 mm width(inner ring width 22 mm). It is catalogued as the rear differential bearing for Mazda CX-4, CX-5, and CX-8 vehicles, and corresponds to the Mazda OE reference KA03-27-210. The bearing uses a nylon cage and is supplied open(without integral seals)for lubrication by the differential gear oil.
Key Specifications
| Parameter | Value |
|---|---|
| Model | F-611420.02.SKL |
| Type | Double-row angular contact ball bearing |
| Bore(d) | 35 mm |
| Outside diameter(D) | 76 mm |
| Total width(T) | 25 mm |
| Inner ring width(B) | 22 mm |
| Weight | ≈ 0.52 kg(published range: 0.50–0.55 kg,confirm against actual batch) |
| Cage | Nylon cage(a steel-cage version is also referenced in some catalogues,confirm physical stock) |
| Seals | Open / no seals |
| Load direction | Radial and axial(combined) |
| HS Code | 8482103000(angular contact ball bearings) |
| OE reference | Mazda KA03-27-210 |
| Application | Mazda CX-4 / CX-5 / CX-8 rear differential |
Performance Features
-
Double-row angular contact geometry: The paired ball rows manage combined radial and axial loads at the rear differential position, where the hypoid gear mesh generates both separation forces and thrust under torque load.
-
Open configuration for gear-oil lubrication: No integral seals,the bearing relies on the differential gear oil for lubrication and cooling, consistent with the wet-sump strategy of the rear axle assembly.
-
Nylon cage(per supplier form): The nylon cage offers low friction and noise damping in the oil-lubricated differential environment. If the physical stock is the steel-cage version, the steel cage provides higher temperature capability and robustness under shock loading.
-
Mazda CX-series differential fitment: Engineered for the rear differential of Mazda CX-4, CX-5, and CX-8, where it supports the differential carrier or pinion shaft under the combined loads of the hypoid gear mesh.
Application
The F-611420.02.SKL is the rear differential bearing for Mazda CX-4, CX-5, and CX-8 vehicles. In service, it supports the differential carrier or pinion shaft under the combined radial and thrust loads generated by the hypoid ring-and-pinion mesh. Replacement requires differential disassembly and should follow Mazda's procedure for bearing preload and gear backlash adjustment. The KA03-27-210 OE reference provides a verified interchange identifier for aftermarket sourcing.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















