Product Overview
The F-627921.KL is a single-row deep groove ball bearing with boundary dimensions 50 mm bore × 80 mm outside diameter × 16 mm width. It is catalogued as a Roewe CVT transmission bearing and corresponds to the CVT180 gearbox model under the OEM reference CVT180-0013-OEM. The bearing is produced from GCr15 chrome steel and is equipped with a nylon cage (KL suffix). It is supplied open (without integral seals) for lubrication by the transmission fluid. The equivalent designation F-627921.KL identifies the nylon-cage version.
Key Specifications
| Parameter | Value |
|---|---|
| Model | F-627921 |
| Equivalent designation | F-627921.KL (nylon cage) |
| Type | Single-row deep groove ball bearing |
| Bore (d) | 50 mm |
| Outside diameter (D) | 80 mm |
| Width (T) | 16 mm |
| Weight | 0.40 kg |
| Bearing / ball material | GCr15 chrome steel |
| Cage | Nylon cage (Polyamide / KL) |
| Seals | Open / no seals |
| Load direction | Radial (deep groove geometry also accommodates moderate bidirectional axial load) |
| Cr (reference) | ≈ 22.9 kN (6010 envelope reference) |
| C0r (reference) | ≈ 15.6–16 kN (6010 envelope reference) |
| HS Code | 8482102000 (deep groove ball bearings) |
| OEM / Application | CVT180-0013-OEM; Roewe CVT180 transmission |
Performance Features
-
KL nylon cage:The nylon cage reduces weight and friction, and provides low-noise operation in the oil-lubricated CVT environment. The KL suffix in the F-627921.KL equivalent designation confirms this cage configuration.
-
Deep groove geometry:The single-row deep groove raceways carry radial loads and accommodate moderate axial loads in both directions, matching the load spectrum of a CVT pulley shaft or gear shaft position.
-
Open configuration for CVT fluid lubrication:No integral seals; the bearing relies on the CVT transmission fluid for lubrication and cooling, consistent with the wet-sump strategy of the gearbox.
-
GCr15 chrome steel construction:Rings and balls are through-hardened for rolling-contact fatigue resistance under the cyclic loading of transmission service.
Application
The F-627921.KL is a CVT transmission bearing for Roewe vehicles, fitted in the CVT180 gearbox. In service, it supports a pulley shaft or gear shaft under the combined radial and moderate axial loads generated by the CVT belt-and-pulley system. The 50 × 80 × 16 mm envelope and the open, oil-lubricated configuration are consistent with a direct-fit transmission service bearing. Replacement requires transmission disassembly and should follow the vehicle manufacturer's procedure for shaft end-play and bearing preload.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















