KC045AR0/KC045CP0/KC045XP0 Reail-silm Thin-section Bearings (4.5x5.25x0.375 Inch)
The KC045AR0/KC045CP0/KC045XP0 bearing is a Reail-silm Thin-section bearings-KC with an inner diameter of 4.5 inch , an outer diameter of 5.25 inch, a width of 0.375 inch. It typically uses P0 grade precision tolerances and Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
| KC045AR0/KC045CP0/KC045XP0 Reail-silm Thin-section bearings (4.5x5.25x0.375 in)(114.3x133.35x9.525 mm) Kaydon Types Robotic Bearings | ||||||||||||||
| A . Reail-silm Thin-section bearings Parameters | ||||||||||||||
| Brand- | TMP | |||||||||||||
| Structure- | Angular Contact Ball/Deep Groove Ball/Four-Point Contact Ball | |||||||||||||
| Model number- | KC045AR0/KC045CP0/KC045XP0 | |||||||||||||
| Inner ring(in)- | 4.5 | |||||||||||||
| Outer ring(in)- | 5.25 | |||||||||||||
| Width(in)- | 0.375 | |||||||||||||
| Weight(lb)- | 0.49 | |||||||||||||
| Materials- | Chrome steel/GCR15/Stainless steel | |||||||||||||
| Precision grade- | P0 | |||||||||||||
| Lubrication type- | Oil | |||||||||||||
| Material(Ball)- | Steel ball/Ceramic ball | |||||||||||||
| Number of Row- | Single rows | |||||||||||||
| Section Type- | Thin section | |||||||||||||
| Quality- | High speed, Low noise and Long life | |||||||||||||
| B . KC045AR0/KC045CP0/KC045XP0 Reail-silm Thin-section bearings Specification Sheet | ||||||||||||||
| Model Number |
Size(in) | Land Diameters (in) | Capacities in Pounds1 | Weight in Pounds |
Limiting Speeds (RPM) |
Torque Max. No Load (in-oz) |
||||||||
| Bore | Outside Diameter |
Land Dia. L1 |
Land Dia. L2 |
C'bore Dia. L3 |
Radial | Thrust | Moment | |||||||
| Static | Dyn. | Static | Dyn. | Static | Dyn. | |||||||||
| KC045AR0 | 4.5 | 5.25 | 4.777 | 4.973 | 5.052 | 2860 | 1234 | 8270 | 2990 | - | - | 0.49 | - | - |
| KC045CP0 | 4.5 | 5.25 | 4.777 | 4.973 | - | 2340 | 1143 | - | - | - | - | 0.48 | - | - |
| KC045XP0 | 4.5 | 5.25 | 4.777 | 4.973 | - | 2860 | 1234 | 8270 | 2990 | 0 | 0 | 0.49 | - | - |
| C . Type A-KC/Type C-KC/Type X-KC series Reail-silm Thin-section bearings Details | ||||||||||||||
| Product Features |
To support various load scenarios,Reail-SlIM Thin section ball bearings are available in three basic types: radial contact (type C), angular contact (type A), and fourpoint contact (type X) and in a variety of sizes , or series (e.g., KA, KB, KC, etc.). Reail-SlIM Thin section ball bearings are available with various separator options to space the rolling elements uniformly and prevent contact between them. |
|||||||||||||
| Applications |
Applications in Robotics, inspection equipment, satellites, cameras… anywhere precise positioning and lightweight designs are critical. |
|||||||||||||
| C . Type A-KC/Type C-KC/Type X-KC series Reail-silm Thin-section bearings 3 types | ||||||||||||||
| Type A-KC |
Open REALI-SLIM Bearing Selections Type A Angular Contact, Snapover assembly permits use of a onepiece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle. |
|||||||||||||
| Type C-KC |
A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of thrust load in |
|||||||||||||
| Type X-KC |
Standard bearing lines are most often designed to handle either radial or axial load conditions. The unique feature about the REALI-SLIM Type X four-point contact bearing line is that the gothic arch geometry of the inner and outer races enables a single bearing to carry three types of applicationssince a single fourpoint contact bearing can often replace two bearings, providing a simplified design. Type X bearings may also be furnished with an internal diametral preload for those applications requiring greater stiffness or zero free play. This is accomplished by using balls that are larger than the space provided in the raceways. The balls and raceways, therefore, have some elastic deformation in the absence of an external load |
|||||||||||||
| C . Type A-KC/Type C-KC/Type X-KC series Reail-silm Thin-section bearings Model Number | ||||||||||||||
| Type A-KC |
KC040AR0,KC042AR0,KC045AR0,KC047AR0,KC050AR0,KC055AR0,KC060AR0,KC065AR0,KC070AR0, KC075AR0,KC080AR0,KC090AR0,KC100AR0,KC110AR0,KC120AR0,KC140AR0,KC160AR0,KC180AR0, KC200AR0,KC250AR0,KC300AR0 |
|||||||||||||
| Type C-KC |
KC040CP0.KC042CP0.KC045CP0.KC047CP0.KC050CP0.KC055CP0.KC060CP0.KC065CP0.KC070CP0. KC075CP0.KC080CP0.KC090CP0.KC100CP0.KC110CP0.KC120CP0.KC140CP0.KC160CP0.KC180CP0 .KC200CP0.KC250CP0.KC300CP0 |
|||||||||||||
| Type X-KC |
KC040XP0,KC042XP0,KC045XP0,KC047XP0,KC050XP0,KC055XP0,,KC060XP0,KC065XP0,KC070XP0 ,KC075XP0,KC080XP0,KC090XP0,KC100XP0,KC110XP0,KC120XP0,KC140XP0,KC160XP0,KC180XP0
| |||||||||||||
