6806-2Z Bearing 30x42x7mm
6806-2Z
Bore Diameter:30 mm
Outside Diameter:42 mm
Width:7 mm
Weight:0.026 kg
The 6806-2Z bearing is a deep groove ball bearing with an inner diameter of 30 mm , an outer diameter of 42 mm, a width of 7 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and seal,open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:30mm
Outer diameter:42mm
Width:7mm
Weight :0.026kg
Dust cover iron seal deep groove ball bearings
Size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6807-2RS bearing 35x47x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:47mm Width:7mm Weight :0.029kg
-
- 6909-2RS bearing 45x68x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:68mm Width:12mm Weight :0.128kg
-
- 6310-2RS bearing 50x110x27mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:110mm Width:27mm Weight :1.07kg
-
- 6304 bearing 20x52x15mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:52mm Width:15mm Weight :0.142kg
-
- 30212 bearing 60x110x23.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30212 bearing Inner: 60mm Outside diameter: 110mm Thickness: 23.75mm
-
- 32006 bearing 30x55x17.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32006 bearing Inner: 30mm Outside diameter: 55mm Thickness:17.0mm
-
- 6213-2Z bearing 65x120x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:120mm Width:23mm Weight :0.98kg
-
- 30209 bearing 45x85x20.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30209 bearing Inner: 45mm Outside diameter: 85mm Thickness: 20.75mm