6806-2RS Bearing 30x42x7mm
6806-2RS
Bore Diameter:30 mm
Outside Diameter:42 mm
Width:7 mm
Weight:0.026 kg
The 6806-2RS bearing is a deep groove ball bearing with an inner diameter of 30 mm , an outer diameter of 42 mm, a width of 7 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and seal,open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:30mm
Outer diameter:42mm
Width:7mm
Weight :0.026kg
Dust cover glue sealing deep groove ball bearings
Feature:The rolling element and raceway in suitable surface separation and made by the rolling element and raceway deformation under load caused by the resistance to a minimum extent Make the raceway and roller sliding friction between the retainer to a minimum
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6412 bearing 60x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:150mm Width:35mm Weight :2.811kg
-
- 6403 bearing 17x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:17mm Outer diameter:62mm Width:17mm Weight :0.27kg
-
- 6216N bearing 80x140x26mm
- Bearing Type:Deep groove ball bearing Inner Diameter:80mm Outer diameter:140mm Width:26mm Weight :3.620kg With locking
-
- 6302-2Z bearing 15x42x13mm
- Bearing Type:Deep groove ball bearing Inner Diameter:15mm Outer diameter:42mm Width:13mm Weight :0.08kg
-
- 6907 bearing 35x55x10mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:55mm Width:10mm Weight :0.074kg
-
- 6405 bearing 25x80x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:80mm Width:21mm Weight :0.53kg
-
- 6312- bearing 60x130x31mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:130mm Width:31mm Weight :1.71kg
-
- 6214-2Z bearing 70x125x24mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:125mm Width:24mm Weight :1.040kg