6310-2RS Bearing 50x110x27mm
6310-2RS
Bore Diameter:50 mm
Outside Diameter:110 mm
Width:27 mm
Weight:1.07 kg
The 6310-2RS bearing is a deep groove ball bearing with an inner diameter of 50 mm , an outer diameter of 110 mm, a width of 27 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:50mm
Outer diameter:110mm
Width:27mm
Weight :1.07kg
Dust cover glue sealing deep groove ball bearings
Feature:The rolling element and raceway in suitable surface separation and made by the rolling element and raceway deformation under load caused by the resistance to a minimum extent Make the raceway and roller sliding friction between the retainer to a minimum
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6308-2Z bearing 40x90x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:40mm Outer diameter:90mm Width:23mm Weight :0.63kg
-
- 6205-2Z bearing 25x52x15mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:52mm Width:15mm Weight :0.120kg
-
- 697 bearing 7x17x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:7mm Outer diameter:17mm Width:5mm Weight :0.0052kg
-
- 6903-2RS bearing 17x30x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:17mm Outer diameter:30mm Width:7mm Weight :0.018kg
-
- 6407 bearing 35x100x25mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:100mm Width:25mm Weight :0.952kg
-
- 6214 bearing 70x125x24mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:125mm Width:24mm Weight :1.084kg
-
- 6300-2RS bearing 10x35x11mm
- Bearing Type:Deep groove ball bearing Inner Diameter:10mm Outer diameter:35mm Width:11mm Weight :0.049kg
-
- 32309 bearing 45x100x38.25mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32309 bearing Inner: 45mm Outside diameter: 100mm Thickness: 38.25mm