6315 Bearing 75x160x37mm
6315
Bore Diameter:75 mm
Outside Diameter:160 mm
Width:37 mm
Weight:3.05 kg
The 6315 bearing is a deep groove ball bearing with an inner diameter of 75 mm , an outer diameter of 160 mm, a width of 37 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:75mm
Outer diameter:160mm
Width:37mm
Weight :3.05kg
Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6406-2Z bearing 30x90x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:30mm Outer diameter:90mm Width:23mm Weight :0.72kg
-
- 6412-2RS bearing 60x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:150mm Width:35mm Weight :2.811kg
-
- 6809-2Z bearing 45x58x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:58mm Width:7mm Weight :0.04kg
-
- 6909-2RS bearing 45x68x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:68mm Width:12mm Weight :0.128kg
-
- 6300-2Z bearing 10x35x11mm
- Bearing Type:Deep groove ball bearing Inner Diameter:10mm Outer diameter:35mm Width:11mm Weight :0.05kg
-
- 30304 bearing 20x52x16.25mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30304 bearing Inner: 20mm Outside diameter: 52mm Thickness: 16.25mm
-
- 6213-2Z bearing 65x120x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:120mm Width:23mm Weight :0.98kg
-
- 30228 bearing 140x250x46.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30228 bearing Inner: 140mm Outside diameter: 250mm Thickness: 46.5mm