6300-2Z Bearing 10x35x11mm
6300-2Z
Bore Diameter:10 mm
Outside Diameter:35 mm
Width:11 mm
Weight:0.05 kg
The 6300-2Z bearing is a deep groove ball bearing with an inner diameter of 10 mm , an outer diameter of 35 mm, a width of 11 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:10mm
Outer diameter:35mm
Width:11mm
Weight :0.05kg
Dust cover iron seal deep groove ball bearings
Size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6312- bearing 60x130x31mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:130mm Width:31mm Weight :1.71kg
-
- 6411-2RS bearing 55x140x33mm
- Bearing Type:Deep groove ball bearing Inner Diameter:55mm Outer diameter:140mm Width:33mm Weight :2.37kg
-
- 696 bearing 6x15x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:6mm Outer diameter:15mm Width:5mm Weight :0.0038kg
-
- 6213-2Z bearing 65x120x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:120mm Width:23mm Weight :0.98kg
-
- 6305-2Z bearing 25x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:62mm Width:17mm Weight :0.22kg
-
- 6213-2RS bearing 65x120x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:120mm Width:23mm Weight :1.05kg
-
- 6208-2RS bearing 40x80x18mm
- Bearing Type:Deep groove ball bearing Inner Diameter:40mm Outer diameter:80mm Width:18mm Weight :0.37kg
-
- 699-2Z bearing 9x20x6mm
- Bearing Type:Deep groove ball bearing Inner Diameter:9mm Outer diameter:20mm Width:6mm Weight :0.0082kg