6406-2Z Bearing 30x90x23mm
6406-2Z
Bore Diameter:30 mm
Outside Diameter:90 mm
Width:23 mm
Weight:0.72 kg
The 6406-2Z bearing is a deep groove ball bearing with an inner diameter of 30 mm , an outer diameter of 90 mm, a width of 23 mm. It typically uses P0, P6, P5,P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:30mm
Outer diameter:90mm
Width:23mm
Weight :0.72kg
Dust cover iron seal deep groove ball bearings
Size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6211-2RS bearing 55x100x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:55mm Outer diameter:100mm Width:21mm Weight :0.60kg
-
- 628-2Z bearing
- Bearing Type:Deep groove ball bearing Inner Diameter:8mm Outer diameter:24mm Width:8mm Weight :0.017kg
-
- 6904-2RS bearing 20x37x9mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:37mm Width:9mm Weight :0.036kg
-
- 6907-2RS bearing 35x55x10mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:55mm Width:10mm Weight :0.074kg
-
- 30314 bearing 70x150x38mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30314 bearing Inner: 70mm Outside diameter: 150mm Thickness: 38mm
-
- 6209-2Z bearing 45x85x19mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:85mm Width:19mm Weight :0.42kg
-
- 6804-2Z bearing 20x32x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:32mm Width:7mm Weight :0.015kg
-
- 6910-2RS bearing 50x72x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:72mm Width:12mm Weight :0.132kg