6212-2RS Bearing 60x110x22mm
6212-2RS
Bore Diameter:60 mm
Outside Diameter:110 mm
Width:22 mm
Weight:0.8 kg
The 6212-2RS bearing is a deep groove ball bearing with an inner diameter of 60 mm , an outer diameter of 110 mm, a width of 22 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:60mm
Outer diameter:110mm
Width:22mm
Weight :0.8kg
Dust cover glue sealing deep groove ball bearings
Feature:The rolling element and raceway in suitable surface separation and made by the rolling element and raceway deformation under load caused by the resistance to a minimum extent Make the raceway and roller sliding friction between the retainer to a minimum
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6303 bearing 17x47x14mm
- Bearing Type:Deep groove ball bearing Inner Diameter:17mm Outer diameter:47mm Width:14mm Weight :0.115kg
-
- 6905-2RS bearing 25x42x9mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:42mm Width:9mm Weight :0.042kg
-
- 6412-2RS bearing 60x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:150mm Width:35mm Weight :2.811kg
-
- 6412 bearing 60x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:150mm Width:35mm Weight :2.811kg
-
- 6810-2RS bearing 50x65x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:65mm Width:7mm Weight :0.052kg
-
- 6300-2RS bearing 10x35x11mm
- Bearing Type:Deep groove ball bearing Inner Diameter:10mm Outer diameter:35mm Width:11mm Weight :0.049kg
-
- 694-2RS bearing 4x11x4mm
- Bearing Type:Deep groove ball bearing Inner Diameter:4mm Outer diameter:11mm Width:4mm Weight :0.0018kg
-
- 30226 bearing 130x230x44.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30226 bearing Inner: 130mm Outside diameter: 230mm Thickness: 44.5mm