30226 Bearing 130x230x44.5mm
30226
Bore Diameter:130 mm
Outside Diameter:230 mm
Width:44.5 mm
Weight:7.43 kg
The 30226 bearing is a taper roller bearing with an inner diameter of 130 mm , an outer diameter of 230 mm, a width of 44.5 mm. It typically uses P0,P4,P5,P6 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Series: taper roller bearing
Brand: CNJX
Bearing type: 30226 bearing
Inner: 130mm
Outside diameter: 230mm
Thickness: 44.5mm
Product Description
About the tapered roller bearings
Tapered roller bearings can be separated by the inner ring and roller, maintains a together make up components and outer ring can be installed separately. Roller and roll the contact point of the fixed way contact wires can reduce stress concentration.
Tapered roller bearings can withstand the big radial direction load and the axial load. Due to the circular cone roller bearings can only transfer one-way axial load, therefore, to transfer the opposite direction of the axial load will need another with the installation of symmetric circular cone roller bearings. Tapered roller bearings is the largest amount of single row circular cone roller bearings. In the front of the car wheel, recent years have used the small size of the double row circular cone roller bearings. Four row circular cone roller bearings used in large cold, ReGaJi and other heavy machine.
Features of Tapered Roller Bearings:
Single-row tapered roller bearings have an outer ring, and an inner ring assembly consisting of an inner ring and a group of tapered rollers embraced by the basket-shaped cage. The outer ring(cup) is separable from the inner ring assembly. According to standardized dimensions of tapered roller bearing specified by ISO, the outer ring or inner ring assembly of any tapered roller bearing with standardized dimension could make international exchange with the outer ring or inner ring assembly of the same series. That is to say, besides external dimensions, tolerances shall be in accordance with the provisions of the ISO492 (GB307), the cone angle of the inner ring assembly and cone diameter of assembly must also comply with the relevant provisions of the exchange.
Generally, when cone angle of outer ring raceway of single-row tapered roller bearings is from 10°to 19°, they could withstand axial loads and radial loads spontaneously. The big the cone angle, the larger the axial loads carrying capacity. Large-sized tapered roller bearings with post code plus B, the cone angle is from 25° to 29°, they carry large axial loads. In addition, single-row tapered roller bearings have the ability to adjust clearance during installation. The inner ring (or outer ring) of double row tapered roller bearings is a whole part. The small end face between two inner rings (or outer rings) is similar, there is one middle spacer ring between two inner rings, and the clearance is adjusted by thickness of spacer ring, which can also be used for adjusting the pre-interference of double row tapered roller bearings.
Share this product to:
Let more people see your product
-
- 30220 bearing 100x180x37.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30220 bearing Inner: 100mm Outside diameter: 180mm Thickness: 37.5mm
-
- 30320 bearing 100x215x52mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30320 bearing Inner: 100mm Outside diameter: 215mm Thickness:
-
- 30212 bearing 60x110x23.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30212 bearing Inner: 60mm Outside diameter: 110mm Thickness: 23.75mm
-
- 32006 bearing 30x55x17.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32006 bearing Inner: 30mm Outside diameter: 55mm Thickness:17.0mm
-
- 6314 bearing 70x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:150mm Width:35mm Weight :2.55kg
-
- 6214-2Z bearing 70x125x24mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:125mm Width:24mm Weight :1.040kg
-
- 6405 bearing 25x80x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:80mm Width:21mm Weight :0.53kg
-
- 6410-2RS bearing 50x130x31mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:130mm Width:31mm Weight :1.855kg