6303 Bearing 17x47x14mm
6303
Bore Diameter:17 mm
Outside Diameter:47 mm
Width:14 mm
Weight:0.115 kg
The 6303 bearing is a deep groove ball bearing with an inner diameter of 17 mm , an outer diameter of 47 mm, a width of 14 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:17mm
Outer diameter:47mm
Width:14mm
Weight :0.115kg
Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6810-2Z bearing 50x65x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:65mm Width:7mm Weight :0.052kg
-
- 6907 bearing 35x55x10mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:55mm Width:10mm Weight :0.074kg
-
- 6216N bearing 80x140x26mm
- Bearing Type:Deep groove ball bearing Inner Diameter:80mm Outer diameter:140mm Width:26mm Weight :3.620kg With locking
-
- 694-2Z bearing 4x11x4mm
- Bearing Type:Deep groove ball bearing Inner Diameter:4mm Outer diameter:11mm Width:4mm Weight :0.0018kg
-
- 32009 bearing 45x75x20.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32009 bearing Inner: 45mm Outside diameter: 75mm Thickness:20.0mm
-
- 6210-2Z bearing 50x90x20mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:90mm Width:20mm Weight :0.47kg
-
- 30220 bearing 100x180x37.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30220 bearing Inner: 100mm Outside diameter: 180mm Thickness: 37.5mm
-
- 6214-2RS bearing 70x125x24mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:125mm Width:24mm Weight :1.13kg