532341 Bore 500 Mm, Split Cylindrical Roller Bearings For Crankshafts In Cold Pilger Rolling Mills, Machined Brass Cage
The 532341 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 532341 bearing is a Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills with an inner diameter of 500 mm , an outer diameter of 850.9 mm, a width of 358 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial, Its dynamic radial rated load is approximately 5500000 N, its static radial rated load is approximately 9500000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
532341 bearings ( 500 mm x 850.9 mm x 358 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 532341 |
| Interchangeable | FAG 532341 |
| Desgin Figure | 2 |
| Cage | Machined Brass Cage |
| Seal | Open |
| Bearing Type | Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills |
| Bearing Weight [lb] | 2160.508 |
| d φ Inside [inch] | 19.685 |
| D Φ Outside [inch] | 33.500 |
| B Width [inch] | 14.094 |
| Bi Width [inch] | 14.173 |
| DD [inch] | 36.614 |
| b [inch] | 8.268 |
| rs min Chamfer | 12x45° mm |
| Cr Radial Dynamic [lbf] | 1236400 |
| C0r Radial Static [lbf] | 2135600 |
Share this product to:
Let more people see your product
