545937 Bore 177.8 Mm, Split Cylindrical Roller Bearings For Crankshafts In Cold Pilger Rolling Mills, Machined Brass Cage
The 545937 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 545937 bearing is a Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills with an inner diameter of 177.8 mm , an outer diameter of 330.2 mm, a width of 137.7 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial, Its dynamic radial rated load is approximately 900000 N, its static radial rated load is approximately 1220000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
545937 bearings ( 177.8 mm x 330.2 mm x 137.7 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 545937 |
| Interchangeable | FAG 545937 |
| Desgin Figure | 3 |
| Cage | Machined Brass Cage |
| Seal | Open |
| Bearing Type | Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills |
| Bearing Weight [lb] | 165.345 |
| d φ Inside [inch] | 7.000 |
| D Φ Outside [inch] | 13.000 |
| B Width [inch] | 5.421 |
| Bi Width [inch] | 5.500 |
| DD [inch] | 16.000 |
| b [inch] | 3.281 |
| rs min Chamfer | 5x45° mm |
| Cr Radial Dynamic [lbf] | 202320 |
| C0r Radial Static [lbf] | 274256 |
Share this product to:
Let more people see your product
