ZE C41/600 K30MB/C083W4 CARB Toroidal Roller Bearings 600*980*375mm

 Product Description:

ZE C41/600 K30MB/C083W4 CARB toroidal roller bearing is a single row bearing with long and slightly arcuate symmetrical rollers and toroidal raceway profile. CARB toroidal roller bearings are non-locating bearings and can only bear radial loads. CARB bearings are usually used to replace non-locating spherical roller bearings in locating/non-locating bearings.

Precautions:
1. ZEC41/600 K30MB/C083W4 uses:
The ZEC41/600 K30MB/C083W4 bearing is used in paper and cardboard paper machines. It is very large, and its length can sometimes reach 200 meters. The paper machine has a wire width of 10 meters, and the papermaking speed can sometimes reach 1800m/min. The paper web passes through a large number of rollers, which are all supported by rolling bearings.
The paper machine is generally composed of the following parts: the wet part includes the forming part and the pressing part; the dry part; the finished part including the calender and the reel uses ZEC41/600 K30MB/C083W4 bearings
2.Bearing data of ZEC41/600 K30MB/C083W4 
Dimension standards Boundary dimensions: ISO 15
Tolerances: Normal
Internal clearance: Normal
Permissible:0,5°
3.Temperature limits
Bearing rings:
The rings of ZEC41/600 K30MB/C083W4 bearings are heat stabilized up to 200 °C (390 °F).
Cages:
Steel or brass cages can be used at the same operating temperatures as the bearing rings.
4.Mounting
C 41/600 K30MB is CARB toroidal roller bearings. During handling, the rings and roller complement of CARB toroidal roller bearings may be axially displaced from their normal position. This is especially likely where CARB bearings are mounted with the shaft or housing in the vertical position:
1)The roller complement, together with the inner or outer ring, will move downward and result in no more clearance.
2)When the bearing rings expand or contract as a result of an interference fit, preload is likely to result.
Therefore, wherever possible:
Mount CARB bearings with the shaft or housing in the horizontal position.
Rotate the inner or outer ring to align the rollers during mounting.
Where this is not feasible, use a bearing handling tool or other device to keep the bearing components arranged centrally.