UCP201 -08 1/2 Pillow Block Bearing
The UCP201 bearing is a Pillow block bearing with an inner diameter of 12 mm , an outer diameter of 127 mm, a width of 30.2 mm. It typically uses P0 P4 P5 P6 grade precision tolerances and Open, Z, ZZ, RS, 2RS, RZ type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
UCP201-08 has a combination of a cast iron pillow block housing with an anti-rotation device with self-alignment and a set screw locking chrome steel insert bearing with a slinger seal design. This specific unit is a standard duty pillow block bearing with a wide inner ring and two set screws and a cast iron unit with the standard base to center height with a grease fitting.
UCP200 Series Pillow Block Bearing is equipped with two specifically designed set screws that are positioned in the inner ring of the ball bearing to lock and attach to the shaft.
.
|
Attributes |
Values |
|
Units |
mm |
|
Bearing Type |
Extended inner race with set screws |
|
Dynamic Load Rating (Cr) |
12,843 |
|
Static Load Rating (Cor) |
6,668 |
|
Shaft Dia. (Fw) |
12.0000 |
|
Shaft Height (h) |
30.2000 |
|
Housing Width (b) |
38.0000 |
|
Mounting Hole Center-to-Center (e) |
95.0000 |
|
Housing Length (a) |
127.0000 |
|
Mounting Slot Length (S2) |
19.0000 |
|
Mounting Slot Width (S1) |
13.0000 |
|
Housing Base Thickness (g) |
12.0000 |
|
Housing Height (w) |
60.0000 |
|
Bearing Inner Race Width (Bi) |
31.0000 |
|
Bearing Inner Race Width - Short Side (n) |
12.7000 |
|
Bearing Inner Race Width - Extended Side (m) |
18.3000 |
|
Mounting Bolt Size |
10.0000 |
|
Bearing Number |
UCP 201 |
|
Housing Number |
P 203 |
|
Shaft Dia., Nominal (d) |
12.0000 |
|
Weight (g) |
635.00 |
|
Material |
Cast iron housing, chrome steel bearing |
Share this product to:
Let more people see your product
-
- UCP201 -08 1/2 Pillow Block Bearing
- UCP200 Series Pillow Block Bearing is equipped with two specifically designed set
-
- UCP201 -08 1/2 Pillow Block Bearing
- UCP200 Series Pillow Block Bearing is equipped with two specifically designed set
-
- 30204J2/Q tapered roller wheel bearing 20mmx47mmx15.25mm
- We manufacture tapered roller bearing combinations – in single, double and four-row
-
- 30205J2/Q tapered roller wheel bearing 25mmx52mmx16.25mm
- We manufacture 30205J2/Q and other tapered roller bearing combinations – in single,
-
- HR30206J tapered roller wheel bearing 20mmx62mmx17.25mm
- we have a short delivery time. If you want to buy HR30206J