RE25025 Crossed Roller Bearing|25031025mm|CNC Bearings|BYC Bearings

🔍

RE25025

Bore Diameter:250 mm

Outside Diameter:310 mm

Width:25 mm

Weight:5 kg

The RE25025 bearing is a crossed roller bearings with an inner diameter of 250 mm , an outer diameter of 310 mm, a width of 25 mm. It typically uses P2/P4/P5 grade precision tolerances and two side seals type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

250 mm

Outside Diameter:

310 mm

Thickness:

25 mm

Weight:

5 KG

Specifications:

Structure:

tiny section cross roller bearing

Brand:

BYC

Precision Rating:

P2/P4/P5

Bearing Material:

Gcr15SiMn bearing steel

Seals Type:

two side seals

Transaction Information:

Payment term:

T/T

Delivery time:

15 days

Detailed description

RE25025 crossed roller bearing|250*310*25mm|CNC bearings|BYC bearings

robot arm used tiny section cross roller bearing

RE25025 (Separable Inner Ring, Type for Outer Ring Rotation):This new model is based on the design of principal of the RB series, Having the same major dimensions as model RB series, its inner ring is separable while the outer ring is integrated with the main body, this model is used in locations where the rotation accuracy of the outer ring is required.

shaft diameter (mm)	Identifi -cation number	Main dimensions						Shoulder height		Basic load rating(radial)		weight
shaft diameter (mm)	Identifi -cation number	inner ring d(mm)	outer ring D(mm)	Ro ller pitch circle diameter dp(mm)	width B B1 (mm)	Greasing hole φ	Chamferr (min)	ds	Dh	C KN	C0 KN	Kg
240	RE 24025	240	300	272.5	25	2	3	256	281	68.3	145	4.5
250	RE 25025	250	310	280.9	25	2	3	268	293	69.3	150	5
	RE 25030		330	287.5	30	3	3	269	306	126	244	8.1
	RE 25040		355	300.7	40	3.5	3	275	326	195	348	14.8
300	RE 30025	300	360	332	25	2	3	319	344	75.7	178	5.9
	RE 30035		395	345	35	3	3	322	368	183	367	13.4
	RE 30040		405	351.6	40	3.5	3	326	377	212	409	17.2
350	RE 35020	350	400	376.6	20	1.5	3	363	383	54.1	143	3.9
400	RE 40035	400	480	440.3	35	3	3.5	422	459	156	370	14.5
400	RE 40040		510	453.4	40	3.5	3.5	428	479	241	531	23.5
450	RE 45025	450	500	476.6	25	1.5	1.5	464	484	61.7	182	6.6
500	RE 50025	500	550	526.6	25	1.5	1.5	514	534	65.5	201	7.3
	RE 50040		600	548.8	40	3	3.5	526	572	239	607	26
	RE 50050		625	561.6	50	3.5	3.5	536	587	267	653	41.7
600	RE 60040	600	700	650	40	3	4	627	673	264	721	29

RE series cross roller bearings:

RE4010 RE4510 RE5013 RE6013 RE7013 RE8016 RE9016 RE10016 RE10020 RE11012 RE11015 RE11020 RE12016 RE12025 RE13015 RE13025 RE14016 RE14025 RE15013 RE15025 RE15030 RE16025 RE17020 RE18025 RE19025 RE20025 RE20030 RE20035 RE22025 RE24025 RE25025 RE25030 RE25040 RE30025 RE30035 RE30040 RE35020 RE35025 RE40035 RE40040 RE45025 RE50025 RE50040 RE50050 RE60040

The inner and outer rings of RE25025, which are separable, are secured to Cross Roller Ring body after the rollers and spacer retainers are installed. This procedure prevents the rings from separating from each other. Thus, it is easy to handle the rings when installing the Cross Roller Ring. The spacer retainer keeps rollers in their proper position,there by preventing them from skewing.and therefore secures a stable rotation torque. the cross array of rollers allows a single Cross Roller bearing RE25025 unit to receive loads in all directions, increasing the rigidity to three to four times greater than the conventional type.

bycbearing.en.alibaba.com/

www.lybybearing.com www.bycbearings.com

Installation Procedure:

1.Thoroughly clean the housing and other parts to be installed, and check to determine if deburring is required.

2.Since the Crossed Roller bearing is a thin-wall bearing type and therefore tends to misalign when it is installed, in case of this situation,gradually drive the product into the housing or onto the shaft by gently hitting it with a plastic hammer, while keeping the product horizontal. Taking care, continue to hammer until it fully contacts the reference surface.

3.Place the presser flange onto the Crossed Roller bearing . Rock the flange several times to match the bolt holes.

4.Insert the presser bolts into the holes. Manually turn the bolts and make sure they do not display skewing caused by misalignment of the holes.

5. As is shown in the pictures below:Tighten the presser bolts in three to four steps from light to full tightening byrepeatedly securing the bolts in diagonal order.When tightening the separable inner or outer ring, slightly turning the integral outer or inner ring will correct the dislocation between the ring and the body.

Share this product to:

Let more people see your product

How can you buy RE25025 Crossed Roller Bearing|250*310*25mm|CNC Bearings|BYC Bearings on the Internet?
High quality RE25025 ( 5 kg Mass, ID: 250 mm OD: 310 mm WD: 25 mm , P2/P4/P5 Accuracy Class , Gcr15SiMn bearing steel Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. RE25025. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- RE45025 crossed roller bearing|450*500*25mm|BYC CNC bearings
- RE40040 crossed roller bearing|400*510*40mm|BYC CNC bearings robot arm used tiny section
- RE30040 crossed roller bearing|300*405*40mm|BYC CNC bearings
- RE30040 crossed roller bearing|300*405*40mm|BYC CNC bearings robot arm used tiny section
- RE40040 crossed roller bearing|400*510*40mm|BYC CNC bearings
- RE40040 crossed roller bearing|400*510*40mm|BYC CNC bearings robot arm used tiny section
- RB6013 crossed roller bearing|Thin section Robotic arm bearing
- Quick Details Type: Slewing BearingBrand Name: BYCBore Size: 60 mmOutside Diameter: 90 mmModel
- RB15013UUCC0 P5 crossed roller bearing|thin section slewing bearing150x180x13mm
- RB15013 crossed roller bearing is the basic model of the Crossed Roller
- RE7013UUCCO/P5 Crossed Roller Bearing 70x100x13mm THK high percision Thin section bearing
- Structure:Crossed Roller Type:Crossed Roller bearing Brand Name:BYC Model Number: RE7013 Size (Metric): -
- NRXT9020E/ Crossed Roller Bearings (90x140x20mm) industrial robots bearing
- NRXT9020E/ Crossed Roller Bearings (90x140x20mm)
- RB70045 crossed roller bearing|Precision CNC bearings|700*815*45mm
- RB70045 crossed roller bearing|Precision CNC bearings|700*815*45mm (Separable Outer Ring, Type for Inner Ring

RE25025 Crossed Roller Bearing|25031025mm|CNC Bearings|BYC Bearings

RE25025 Related Products »

Product Groups

Information

Category