RE45025 Crossed Roller Bearing|45050025mm|BYC CNC Bearings

🔍

RE45025

Bore Diameter:450 mm

Outside Diameter:500 mm

Width:25 mm

Weight:6.6 kg

The RE45025 bearing is a crossed roller bearings with an inner diameter of 450 mm , an outer diameter of 500 mm, a width of 25 mm. It typically uses P2/P4/P5 grade precision tolerances and two side seals type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

450 mm

Outside Diameter:

500 mm

Thickness:

25 mm

Weight:

6.6 KG

Specifications:

Structure:

cross roller

Brand:

BYC

Precision Rating:

P2/P4/P5

Bearing Material:

Gcr15 bearing steel

Seals Type:

two side seals

Transaction Information:

Payment term:

T/T

Delivery time:

15 days

Detailed description

RE45025 crossed roller bearing|450*500*25mm|BYC CNC bearings

robot arm used tiny section cross roller bearing

RE45025 (Separable Inner Ring, Type for Outer Ring Rotation):This new model is based on the design of principal of the RB series, Having the same major dimensions as model RB series, its inner ring is separable while the outer ring is integrated with the main body, this model is used in locations where the rotation accuracy of the outer ring is required.

shaft diameter (mm)	Identifi -cation number	Main dimensions						Shoulder height		Basic load rating(radial)		weight
shaft diameter (mm)	Identifi -cation number	inner ring d(mm)	outer ring D(mm)	Ro ller pitch circle diameter dp(mm)	width B B1 (mm)	Greasing hole φ	Chamferr (min)	ds	Dh	C KN	C0 KN	Kg
240	RE 24025	240	300	272.5	25	2	3	256	281	68.3	145	4.5
250	RE 25025	250	310	280.9	25	2	3	268	293	69.3	150	5
	RE 25030		330	287.5	30	3	3	269	306	126	244	8.1
	RE 25040		355	300.7	40	3.5	3	275	326	195	348	14.8
300	RE 30025	300	360	332	25	2	3	319	344	75.7	178	5.9
	RE 30035		395	345	35	3	3	322	368	183	367	13.4
	RE 30040		405	351.6	40	3.5	3	326	377	212	409	17.2
350	RE 35020	350	400	376.6	20	1.5	3	363	383	54.1	143	3.9
400	RE 40035	400	480	440.3	35	3	3.5	422	459	156	370	14.5
400	RE 40040		510	453.4	40	3.5	3.5	428	479	241	531	23.5
450	RE 45025	450	500	476.6	25	1.5	1.5	464	484	61.7	182	6.6
500	RE 50025	500	550	526.6	25	1.5	1.5	514	534	65.5	201	7.3
	RE 50040		600	548.8	40	3	3.5	526	572	239	607	26
	RE 50050		625	561.6	50	3.5	3.5	536	587	267	653	41.7
600	RE 60040	600	700	650	40	3	4	627	673	264	721	29

RE series cross roller bearings:

RE4010 RE4510 RE5013 RE6013 RE7013 RE8016 RE9016 RE10016 RE10020 RE11012 RE11015 RE11020 RE12016 RE12025 RE13015 RE13025 RE14016 RE14025 RE15013 RE15025 RE15030 RE16025 RE17020 RE18025 RE19025 RE20025 RE20030 RE20035 RE22025 RE24025 RE25025 RE25030 RE25040 RE30025 RE30035 RE30040 RE35020 RE35025 RE40035 RE40040 RE45025 RE50025 RE50040 RE50050 RE60040

The inner and outer rings of RE45025, which are separable, are secured to Cross Roller Ring body after the rollers and spacer retainers are installed. This procedure prevents the rings from separating from each other. Thus, it is easy to handle the rings when installing the Cross Roller Ring. The spacer retainer keeps rollers in their proper position,there by preventing them from skewing.and therefore secures a stable rotation torque. the cross array of rollers allows a single Cross Roller bearing RE45025 unit to receive loads in all directions, increasing the rigidity to three to four times greater than the conventional type.

bycbearing.en.alibaba.com/

www.lybybearing.com www.bycbearings.com

Installation Procedure:

1.Thoroughly clean the housing and other parts to be installed, and check to determine if deburring is required.

2.Since the Crossed Roller bearing is a thin-wall bearing type and therefore tends to misalign when it is installed, in case of this situation,gradually drive the product into the housing or onto the shaft by gently hitting it with a plastic hammer, while keeping the product horizontal. Taking care, continue to hammer until it fully contacts the reference surface.

3.Place the presser flange onto the Crossed Roller bearing . Rock the flange several times to match the bolt holes.

4.Insert the presser bolts into the holes. Manually turn the bolts and make sure they do not display skewing caused by misalignment of the holes.

5. As is shown in the pictures below:Tighten the presser bolts in three to four steps from light to full tightening byrepeatedly securing the bolts in diagonal order.When tightening the separable inner or outer ring, slightly turning the integral outer or inner ring will correct the dislocation between the ring and the body.

Packing:Vacuum package:40mm-200mm
Wooden box package:200mm-1500mm

Shipping:By air or By sea

Nowadays, as a professional percision bearing manufacture, we are proud of continual innovation, flexible production, speedy delivery, rapid after-sales service(2 years) and quick response.

Share this product to:

Let more people see your product

How can you buy RE45025 Crossed Roller Bearing|450*500*25mm|BYC CNC Bearings on the Internet?
High quality RE45025 ( 6.6 kg Mass, ID: 450 mm OD: 500 mm WD: 25 mm , P2/P4/P5 Accuracy Class , Gcr15 bearing steel Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. RE45025. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- RB11012 crossed roller bearing110*135*12mm|thin section bearing
- Quick Details Type: Slewing Bearing Brand Name: BYC Bore Size: 110 mm Outside
- RE50040 crossed roller bearing|500*600*40mm|BYC CNC bearings
- RE50040 crossed roller bearing|500*600*40mm|BYC CNC bearings robot arm used tiny section
- RB9016 crossed roller bearing|Thin section slewing ring bearing
- Quick Details Type: Slewing Bearing Brand Name: BYC Bore Size: 80 mm Outside
- RB11020 crossed roller bearing|thin section slewing bearing|110*160*20mm
- Quick Details Type: Slewing Bearing Brand Name: BYC Bore Size: 110 mm Outside
- RA11008CC0 crossed roller bearing|thin section Robotic bearing|110*126*8mm
- RA11008 crossed roller bearing|thin section bearing|pick bearing size for Robotic (Separable Outer
- CRBF8022/RU124UUCCO Crossed Roller Bearings (80x165x22mm) Precision Robotic Bearings
- CRBF8022/RU124 Crossed Roller Bearings 80x165x22mm Robotic arm use RU special type is a
- RB30035UUCC0 P5 crossed roller bearing|CNC bearings|300*395*35mm
- RB30035 crossed roller bearing|CNC bearings|300*395*35mm (Separable Outer Ring, Type for Inner Ring Rotation) RB30035
- YRT650|Rotary table bearing|650*870*122mm |BYC CNC bearing
- YRT650|Rotary table bearing|650*870*122mm |BYC CNC bearing CNC machine tool rotary table bearings Axial/radial

RE45025 Crossed Roller Bearing|45050025mm|BYC CNC Bearings

RE45025 Related Products »

Product Groups

Information

Category