Original Germany 7000AC Angular Contact Ball Bearings
The 7000AC bearing is a Angular Contact Ball Bearings with an inner diameter of 10 mm , an outer diameter of 26 mm, a width of 8 mm. It typically uses z2v2 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Item No.: 7000AC Ball Bearing
Structure: Angular Contact Ball Bearing
Type:Ball Bearing
ID (inner diameter)/Bore: 10 mm
OD (outer diameter): 26 mm
Width/Height/thickness: 8 mm
Angle contact ball bearing can be both radial load and axial load. Can work under at higher speed. Contact Angle is, the greater the axial bearing capacity is higher. High precision and high-speed bearing usually take 15 degrees contact Angle. In the axial force function, contact Angle increases. Single Angle contact ball bearing can only carry axial load in one direction, in radial load, will cause additional axial force. And only limit shaft or shell in a direction of the axial displacement. If paired quality.the installation, make a pair of bearing outer ring, namely the wide end face relatively wide ends, narrow end face narrow end. So we can avoid causing additional axial force, but also in both directions make axis or shell limits in the axial clearance range.
Share this product to:
Let more people see your product
-
- Original Germany 7000AC Angular Contact Ball Bearings
- Item No.: 7000AC Ball Bearing Structure: Angular Contact Ball Bearing Type:Ball Bearing ID (inner diameter)/Bore: