JDB-5 Material-Based Bush
The JDB-5 bearing is a JDB Impregnated Graphite Oilless Bearing with an inner diameter of 8 mm , an outer diameter of 12 mm, a width of 8 mm. It typically uses P0 grade precision tolerances and N/M type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Introduction:
JDB 5 is reinforced product of JDB series.It is based steel GCR15 adn embedded with solid lubricant.it is of high compress strength and particularly suitable ofr supporting position in hoisting machines,e.g.The support or stand of windlass and of crane.But it should not be appliedin water or in acid/alkali circumstance.
Can be used under low,middle and high load.
Due to its superb high hardness, when under high load, it overperforms than other JDB type.
Not suitable for water,acid,ahkili circumstances.
Most suitable for the supporting position of hoisting machine, e.g. bulldozer supporter, hoister supporter, reeling machine supporter etc.
Technical:
Base material:GCr15
Base Hardness:HRC58-60
Friction coef(u):<0.17
Temperature limit :
Dynamic load limit:250N/mm2
lLoad limit under lm/min:70N/mm
Speed limit:
PV limit:2.5N/mm2 *m/s
Share this product to:
Let more people see your product
-
- JDB-5 Material-Based Bush
- Model:JDB-5 Material-Based Bush ID:8mm OD:12mm Thickness:8mm