Product Overview
The F-673075.RTR1 is a single-row tapered roller bearing manufactured to FAG / Schaeffler specification. The “TR1” suffix denotes single-row tapered roller bearing construction, designed to carry combined radial and axial loads in automotive transmission applications. The bearing is supplied open (without integral seals) for lubrication by the transmission oil circuit, and features a stamped steel cage as standard for the TR1 series.
Dimensional note: The boundary dimensions (bore, outside diameter, width) are not published in accessible public catalogues. The supplier must provide the verified envelope from the FAG drawing or physical measurement before publication. The listing should not invent or estimate these figures.
Key Specifications (confirmed and pending)
| Parameter | Value |
|---|---|
| Model | F-673075.RTR1 |
| Type | Single-row tapered roller bearing |
| Bore (d) | Consult supplier (not published) |
| Outside diameter (D) | Consult supplier (not published) |
| Width (T) | Consult supplier (not published) |
| Rolling element material | GCr15 chrome steel |
| Cage | Stamped steel cage(TR1-series standard,confirm against physical stock) |
| Seals | Open / no seals |
| Load direction | Radial and axial(combined) |
| HS Code | 8482500090(tapered roller bearings) |
| Application | Automotive transmission / gearbox bearing |
Performance Features
-
Single-row tapered roller geometry:The conical raceways support combined radial and axial loads simultaneously, with axial capacity in one direction. The tapered design provides the stiffness required for gear-mesh loads in transmission service.
-
Stamped steel cage(TR1-series standard):The pressed steel cage retains and guides the tapered rollers under the cyclic loading of gearbox operation, and is the verified cage configuration for the FAG TR1 series.
-
Open configuration for oil-circuit lubrication:No integral seals,the bearing relies on the transmission oil for lubrication and cooling, consistent with the wet-sump strategy of a gearbox.
-
GCr15 chrome steel construction:Rings and rollers are through-hardened for rolling-contact fatigue resistance under the cyclic loading of automotive transmission service.
Application
The F-673075.RTR1 is used as an automotive transmission / gearbox bearing. In service, it supports a gear shaft under the combined radial and axial loads generated by the transmission gear train. Replacement requires transmission disassembly and should follow the vehicle manufacturer’s procedure for shaft end-play and bearing preload adjustment.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















