Product Description
The F-612300.05.NUP-C01 is a full-complement (cageless) cylindrical roller bearing with a NUP configuration, specified for the CVT automatic gearbox of Buick vehicles (and related GM CVT applications). It is produced from GCr15 chrome steel and is supplied open (no seals) for lubrication by the transmission fluid. The NUP design — with integral flanges on both sides of the outer ring and one side of the inner ring — provides axial location in both directions, making it a locating bearing that positions the shaft within the CVT pulley assembly.
Critical corrections before publication (Check column reasons)
1. Cage type: the supplier form says “Steel cage,” but the product is cageless (full-complement).
The supplier form specifies Cage Type: Steel cage and Cage material: Steel. The specification sheet for this exact part number states “Cage Material: No cage” and describes the bearing as “Full Complement Cylindrical Roller Bearing (No Cage, NUP Configuration)”. The Feature field in the supplier form even says “Cylindrical roller bearings without cage,” which directly contradicts the Cage Type field. This internal inconsistency is a primary reason for a NO check result.
Correction: Set Cage Type = No cage (full complement) and Cage material = Not applicable.
2. Weight field is blank, but a published reference exists.
The supplier form leaves Weight blank. The sheet lists weight as “*** Kg” (not disclosed), but a Russian CVT parts supplier lists the net weight as 1 kg for the same F-612300.05.NUP designation. The listing should populate Weight = 1.0 (with a note that this is a supplier reference value).
3. Seal material field is blank; the bearing is open.
The supplier form correctly sets Seals Type = Open, but leaves Seal Material blank. The sheet confirms “Seal Type: Open (No Seals)”. Populate Seal Material = No seals.
4. HS Code is correct (8482500090), but the structure “Cylindrical roller bearings” must be retained and reinforced.
The supplier form’s Structure = Cylindrical roller bearings and HS Code = 8482500090 are both correct for this bearing type. Keep them. The NUP configuration should be noted in the description because it distinguishes this bearing from a standard NU or N series cylindrical roller bearing.
5. Application can be refined for better search relevance.
The supplier form’s application “Buick CVT Gearbox Automotive Automatic Transmission” is accurate. Additional context from the catalogue data: this bearing is used as a CVT driven pulley bearing in VT40 / CVT250 transmissions, and the related OE reference is 395228A-EM. Adding these identifiers to the description will help qualified buyers find the listing.
Key Specifications (corrected)
| Parameter | Value |
|---|---|
| Model | F-612300.05.NUP-C01 |
| Type | Full-complement cylindrical roller bearing, NUP configuration (no cage) |
| Bore diameter (d) | 33 mm |
| Outside diameter (D) | 75 mm |
| Width (B) | 19 mm |
| Weight | ≈ 1.0 kg (supplier reference; confirm against physical batch) |
| Bearing / roller material | GCr15 chrome steel |
| Cage | No cage (full complement) |
| Seals | Open (no seals) |
| Load direction | Radial (NUP design also provides limited bidirectional axial location) |
| Precision rating | P0 / P6 / P5 available |
| HS Code | 8482500090 (cylindrical roller bearings) |
| Related OE / interchange | 395228A-EM; CVT-VT40 / CVT250 applications |
| Application | Buick CVT gearbox / CVT driven pulley bearing |
Dimensional note: Some Russian CVT parts listings show 32 mm bore × 73 mm OD × 18 mm width for the F-612300.05.NUP designation. The 33 × 75 × 19 mm envelope in the supplier form is the dimension set published on the specification sheet for the F-612300.05.NUP-C01 suffix. The difference is small and may reflect a measurement convention or a variant suffix; the supplier should confirm the physical stock measurement before publication if the platform requires exact dimensional matching.
Performance Features
-
Full-complement NUP design for maximum radial capacity: The absence of a cage allows the maximum number of cylindrical rollers to be loaded, delivering high radial load capacity and rigidity within the compact 33 × 75 × 19 mm envelope. This is critical in a CVT pulley position where the bearing must withstand the variable torque and speed conditions of the belt-and-pulley system.
-
Bidirectional axial location (NUP configuration): The integral flanges on both sides of the outer ring and one side of the inner ring allow the bearing to position the shaft axially in both directions, functioning as a locating bearing within the transmission assembly. This simplifies the transmission layout by eliminating the need for a separate thrust bearing at this position.
-
Open configuration for CVT fluid lubrication: No integral seals; the bearing relies on the CVT transmission fluid for lubrication and cooling, consistent with the wet-sump strategy of the gearbox.
-
GCr15 chrome steel construction: Rings and rollers are through-hardened for rolling-contact fatigue resistance under the cyclic loading of CVT service.
Application
The F-612300.05.NUP-C01 is a cylindrical roller bearing for the CVT automatic gearbox of Buick vehicles. It is documented as a CVT driven pulley bearing (front) in VT40 / CVT250 transmissions, and the related OE reference is 395228A-EM. In service, the bearing supports the driven pulley shaft under the high radial loads generated by the steel belt or chain in the CVT, while the NUP flanges provide axial positioning of the shaft within the transmission housing. Replacement requires transmission disassembly and should follow the vehicle manufacturer’s procedure for shaft end-play and bearing preload.
Ordering & Logistics
| Item | Detail |
|---|---|
| Stock | 72 pcs |
| Minimum order | 1 pc |
| FOB price | US$10 – US$50 per piece |
| Payment | PayPal / Western Union / T/T (100% in advance) |
| Delivery | 3–4 workdays after payment |
| Shipping | DHL / FedEx / UPS / TNT |
| Ports | Shanghai / Guangzhou |
| Packing | Standard export packing |
| Brand | As required (authorized brands only) |
| Country of origin | China |
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















