Deep Groove Ball Bearing 6204
The 6204 bearing is a Deep groove ball bearing with an inner diameter of 20 mm , an outer diameter of 47 mm, a width of 12 mm. open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Deep groove ball bearing 6204
d = 20
D = 47
B = 14
D1 = 44.6
a = 2.46
D2 = 52.7
f = 1.12
da(min) = 26
Da(max) = 41
Dx(min) = 53.5
ra(max) = 1
Cy(max) = 3.3
Mass = 0.106
Deep groove ball bearings have high speed and are widely used as radial bearings. These non-separable bearings are available in a wide variety of seal, shield and snap-ring arrangements. Deep Groove Ball Bearings are cost-effective and maintenance free. They are basically used when axial loads from two directions have to be transmitted & there is not enough space to allow installation of matched spindle bearings and when speed is less important when compared to required guidance of the rotating parts.
Share this product to:
Let more people see your product
-
- Deep groove ball bearings 6003
- Deep groove ball bearings6003 The new model 6003 The old model 103 Brand
-
- Deep groove ball bearing 6006-Z 6006-2RS
- Deep groove ball bearing 6006-Z We supply many types of bearings ,we also
-
- Deep groove ball bearing 16002
- Deep groove ball bearing 16002 We supply many types of bearings ,we also
-
- Deep groove ball bearing 61909-rs
- Deep groove ball bearing 61909-RS The new model 61909 - RS The old model