CA314196 Yoke Cam Followers For HYDRA RIG Coiled Tubing Chain
The CA314196 bearing is a Non Standard Bearings with an inner diameter of 19.05 mm , an outer diameter of 63.5 mm, a width of 49.2 mm. It typically uses P4 grade precision tolerances and It primarily bears Radial, Its dynamic radial rated load is approximately 107KN, its static radial rated load is approximately 146KN. It uses C0 standard radial clearance, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Application: HYDRA RIG Coiled Tubing Chain
- Bearing:CB314196
- d:31.75mm
- D:63.5mm
- B:49.2mm
- Cr:107KN
- Cor:146KN
- Selas:Yes
- Type:Yoke Type Cam Followers
- Brand:MONTON
- Orignal:Luoyang
- Delivery:5-35 days
N.O.V Hydra Rig bearing and models:
Coiled Tubing Car HYDRA RIG-HR63 Coiled Tubing Chain Bearing-CB318979
Coiled tubing truck HYDRA RIG-HR440B-injection head chain bearing-CA310017
Coiled Tubing Car HYDRA RIG-HR63 Coiled Tubing Chain Bearing-CD310366
Coiled Tubing Car HYDRA RIG-HR63 Coiled Tubing Chain Bearing-CB315402
Coiled Tubing Car HYDRA RIG-HR63 Coiled Tubing Chain Bearing-CB318981
Roller bearing P / N: CA314196
SHAFT BEARING P / N: CB315402
PAD ELASTOMER P / N: CB315388
Yoke Type cam followers are intended primarily for applications where loading conditions exceed the capabilities of stud type cam followers, orwhere clevis mounting is desired. Clevis mounting provides support on both sides of the cam follower and permits use of a high strength pin. Yoke type cam fol lowers are available with and without seals, and with crowned outer rings.
yoke rollers correspond in many respects to the same size cam follower, except they are mounted on a pin for use in yoke type applications for greater shock resistance.
Yoke rollers should be clamped axially or mounted within closely fitting side rails to prevent dis place ment of the end plates. For applications with heavy loads, it is recommended to heat treat the pin and use a press fit
for the inner ring. A soft pin and light press or push fit are sufficient for lightly loaded applications. When press fitting a yoke roller, pres sure should be applied centrally and uniformly against the end plate, never
against the outer ring.
The pin should have a suitable lead-in chamfer or radius to prevent scoring and to hold the mounting force to a minimum.
Share this product to:
Let more people see your product
-
- F-567384-2RS/P4 50*110*23mm Fanuc servo motor bearing
- Servo motor bearing features: good sealing, high stability, metal material is preferred.
-
- F-568240-2RS/P4 40*80*23mm Fanuc Servo Motor Ceramic Ball bearing
- Servo motor bearing features: good sealing, high stability, metal material is preferred.
-
- F-568241-2RS/P4 40*90*23mm Fanuc servo motor Ceramic Ball bearing
- Servo motor bearing features: good sealing, high stability, metal material is preferred.
-
- B40-160-2RS/P4 30*72*19mm Fanuc servo motor repair Ceramic Ball bearing
- Servo motor bearing features: good sealing, high stability, metal material is preferred.
-
- 22236CC/W33 180X320X86mm Spherical roller bearing
- Spherical Roller Bearings are designed to work in applications where severe misalignment
-
- RE40035UUCC0P5 400*480*35mm Crossed roller bearing for Harmonic Drive Servo Actuator
- Since holes are drilled for mounting, the need for a presser fl
-
- 24038CC/W33 190X290X100mm Spherical roller bearing
- Spherical Roller Bearings are designed to work in applications where severe misalignment
-
- 6208-H-T35D 40*80*18mm Cryogenic pump bearings Ultra-Low Temperature Bearing for Liquid Oxygen Pump
- LNG (Liquefied Natural Gas) pumps are used for receiving and discharging LNG