6808-2Z Bearing 40x52x7mm
6808-2Z
Bore Diameter:40 mm
Outside Diameter:52 mm
Width:7 mm
Weight:0.033 kg
The 6808-2Z bearing is a deep groove ball bearing with an inner diameter of 40 mm , an outer diameter of 52 mm, a width of 7 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and seal,open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:40mm
Outer diameter:52mm
Width:7mm
Weight :0.033kg
Dust cover iron seal deep groove ball bearings
Size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6307-2RS bearing 35x80x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:80mm Width:21mm Weight :0.435kg
-
- 6310 bearing 50x110x27mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:110mm Width:27mm Weight :1.082kg
-
- 6804-2RS bearing 20x32x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:32mm Width:7mm Weight :0.015kg
-
- 698-2RS bearing 8x19x6mm
- Bearing Type:Deep groove ball bearing Inner Diameter:8mm Outer diameter:19mm Width:6mm Weight :0.0073kg
-
- 6408-2RS bearing 40x110x27mm
- Bearing Type:Deep groove ball bearing Inner Diameter:40mm Outer diameter:110mm Width:27mm Weight :1.2kg
-
- 6214-2Z bearing 70x125x24mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:125mm Width:24mm Weight :1.040kg
-
- 6809-2RS bearing 45x58x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:58mm Width:7mm Weight :0.04kg
-
- 6209-2Z bearing 45x85x19mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:85mm Width:19mm Weight :0.42kg