6809-2RS Bearing 45x58x7mm
6809-2RS
Bore Diameter:45 mm
Outside Diameter:58 mm
Width:7 mm
Weight:0.04 kg
The 6809-2RS bearing is a deep groove ball bearing with an inner diameter of 45 mm , an outer diameter of 58 mm, a width of 7 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and seal,open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:45mm
Outer diameter:58mm
Width:7mm
Weight :0.04kg
Dust cover glue sealing deep groove ball bearings
Feature:The rolling element and raceway in suitable surface separation and made by the rolling element and raceway deformation under load caused by the resistance to a minimum extent Make the raceway and roller sliding friction between the retainer to a minimum
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6315-2RS bearing 75x160x37mm
- Bearing Type:Deep groove ball bearing Inner Diameter:75mm Outer diameter:160mm Width:37mm Weight :3.02kg
-
- 6902-2RS bearing 15x28x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:15mm Outer diameter:28mm Width:7mm Weight :0.016kg
-
- 6211-2RS bearing 55x100x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:55mm Outer diameter:100mm Width:21mm Weight :0.60kg
-
- 6311-2Z bearing 55x120x29mm
- Bearing Type:Deep groove ball bearing Inner Diameter:55mm Outer diameter:120mm Width:29mm Weight :1.37kg
-
- 32213 bearing 65x120x32.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32213 bearing Inner: 65mm Outside diameter: 120mm Thickness:
-
- 32211 bearing 55x100x26.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32211 bearing Inner: 55mm Outside diameter: 100mm Thickness:
-
- 32307 bearing 35x80x32.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32307 bearing Inner: 35mm Outside diameter: 80mm Thickness: 32.75mm
-
- 30319 bearing 95x200x50mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30319 bearing Inner: 95mm Outside diameter: 200mm Thickness: