6403-2Z Bearing 17x62x17mm
6403-2Z
Bore Diameter:17 mm
Outside Diameter:62 mm
Width:17 mm
Weight:0.27 kg
The 6403-2Z bearing is a deep groove ball bearing with an inner diameter of 17 mm , an outer diameter of 62 mm, a width of 17 mm. It typically uses P0, P6, P5,P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:17mm
Outer diameter:62mm
Width:17mm
Weight :0.27kg
Dust cover iron seal deep groove ball bearings
Size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 694-2Z bearing 4x11x4mm
- Bearing Type:Deep groove ball bearing Inner Diameter:4mm Outer diameter:11mm Width:4mm Weight :0.0018kg
-
- 6300-2RS bearing 10x35x11mm
- Bearing Type:Deep groove ball bearing Inner Diameter:10mm Outer diameter:35mm Width:11mm Weight :0.049kg
-
- 6305-2RS bearing 25x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:62mm Width:17mm Weight :0.229kg
-
- 6214 bearing 70x125x24mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:125mm Width:24mm Weight :1.084kg
-
- 30320 bearing 100x215x52mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30320 bearing Inner: 100mm Outside diameter: 215mm Thickness:
-
- 6410-2Z bearing 50x130x31mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:130mm Width:31mm Weight :1.855kg
-
- 6204-2RS bearing 20x47x14mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:47mm Width:14mm Weight :0.104kg
-
- 6314-2RS bearing 70x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:70mm Outer diameter:150mm Width:35mm Weight :2.55kg