6314-2RS Bearing 70x150x35mm
6314-2RS
Bore Diameter:70 mm
Outside Diameter:150 mm
Width:35 mm
Weight:2.55 kg
The 6314-2RS bearing is a deep groove ball bearing with an inner diameter of 70 mm , an outer diameter of 150 mm, a width of 35 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:70mm
Outer diameter:150mm
Width:35mm
Weight :2.55kg
Dust cover glue sealing deep groove ball bearings
Feature:The rolling element and raceway in suitable surface separation and made by the rolling element and raceway deformation under load caused by the resistance to a minimum extent Make the raceway and roller sliding friction between the retainer to a minimum
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6212 bearing 60x110x22mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:110mm Width:22mm Weight :0.789kg
-
- 6900-2RS bearing 10x22x6mm
- Bearing Type:Deep groove ball bearing Inner Diameter:10mm Outer diameter:22mm Width:6mm Weight :0.009kg
-
- 6908 bearing 40x62x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:40mm Outer diameter:62mm Width:12mm Weight :0.11kg
-
- 6810-2RS bearing 50x65x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:65mm Width:7mm Weight :0.052kg
-
- 6907-2Z bearing 35x55x10mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:55mm Width:10mm Weight :0.074kg
-
- 693-2RS bearing 3x8x3mm
- Bearing Type:Deep groove ball bearing Inner Diameter:3mm Outer diameter:8mm Width:3mm Weight :0.0006kg
-
- 32213 bearing 65x120x32.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32213 bearing Inner: 65mm Outside diameter: 120mm Thickness:
-
- 30221 bearing 105x190x39.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30221 bearing Inner: 105mm Outside diameter: 190mm Thickness: 39.5mm