61938M Bearing
61938M
Bore Diameter:190 mm
Outside Diameter:260 mm
Width:33 mm
The 61938M bearing is a Deep Groove Ball Bearing with an inner diameter of 190 mm , an outer diameter of 260 mm, a width of 33 mm. It typically uses P5 grade precision tolerances and no type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
61938M bearing
Deep groove ball bearings are used in a considerable variety of applications. Their structures are simple and convenient to use. The bearings are primarily to carry radial loads, and also capable of carrying combination loads in radial and axial directions, and have the same performance as angular contact ball bearings when increasing internal radial clearance of bearings. If speed is relatively high, and thrust ball bearings are not suitable, pure axial loads can also be carried. By comparison with other types of bearings, this type of bearings have lower friction coefficient, higher limiting speed. But they are not suitable for carrying shock and heavy loads.
Deep groove ball bearings are used in a considerable variety of applications. Their structures are simple and convenient to use. The bearings are primarily to carry radial loads, and also capable of carrying combination loads in radial and axial directions, and have the same performance as angular contact ball bearings when increasing internal radial clearance of bearings. If speed is relatively high, and thrust ball bearings are not suitable, pure axial loads can also be carried. By comparison with other types of bearings, this type of bearings have lower friction coefficient, higher limiting speed. But they are not suitable for carrying shock and heavy loads.
After deep groove ball bearings are mounted on the shaft, they are able to limit the two directions of axial displacement on shafts or housings in the extent of internal axial clearance. Therefore, they can be positioned axially. In addition, this type of bearings have certain aligning ability. While misaligning with housing by 2’~10’, they can also operate normally, but the operating life would be reduced.
Share this product to:
Let more people see your product
-
- 6819ZZ 6819-2RS bearing
- Size: 95 x 120 x 13 mm Quantity: One Bearing Dynamic load rating Cr:
-
- 61938M bearing
- 61938M bearing Deep groove ball bearings are used in a considerable variety of
-
- 16015 bearing
- 1) Model: Open, 16015Z, 16015ZZ, 16015RZ,16015-2RZ,16015RS, 16015-2RS 2) Tolerance level: ABEC-1 (P0), ABEC-3
-
- 6004-ZZ 6004-2RS 6004 bearing
- 6004 Deep groove ball bearing Size:20x47x14mm Seal Type:OPEN,ZZ,2RS Material:Gcr15/Chrome steel(AISI 52100),Stainless steel(AISI 440C) Place OF