6000 ZZ Bearing
The 6000 ZZ bearing is a deep groove ball bearing with an inner diameter of 10 mm , an outer diameter of 26 mm, a width of 8 mm. It typically uses P0 or P5 or P4 grade precision tolerances and ZZ type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Single row deep groove ball bearing with two metal shields 10mm inside x 26mm outside x 8mm width
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Share this product to:
Let more people see your product
-
- 6016 ZZ bearing
- Single row deep groove ball bearing 6016 with two metal shields 80mm
-
- 6219 ZZ bearing
- Single row deep groove ball bearing 6219 with two metal shields 95mm
-
- 6252 bearing
- Single row deep groove ball bearing 6252 without shields 260mm inside x
-
- 6052 bearing
- Single row deep groove ball bearing 6052 without shields 260mm inside x
-
- 6248 bearing
- Single row deep groove ball bearing 6248 without shields 240mm inside x
-
- 6404 bearing
- Single row deep groove ball bearing without shields 20mm inside x 72mm
-
- 6322 bearing
- Single row deep groove ball bearing without shields 110mm inside x 240mm
-
- 6015 ZZ bearing
- Single row deep groove ball bearing 6015 with two metal shields 75mm