6000 2RS Bearing
The 6000 2RS bearing is a deep groove ball bearing with an inner diameter of 10 mm , an outer diameter of 26 mm, a width of 8 mm. It typically uses P0 or P5 or P4 grade precision tolerances and 2RS type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Single row deep groove ball bearing with two rubber shields 10mm inside x 26mm outside x 8mm width
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Share this product to:
Let more people see your product
-
- 6218 ZZ bearing
- Single row deep groove ball bearing 6218 with two metal shields 90mm
-
- 6040 bearing
- Single row deep groove ball bearing 6040 without shields 200mm inside x
-
- 6024 2RS bearing
- Single row deep groove ball bearing 6024 with two rubber shields 120mm
-
- 6021 ZZ bearing
- Single row deep groove ball bearing 6021 with two metal shields 105mm
-
- 6015 ZZ bearing
- Single row deep groove ball bearing 6015 with two metal shields 75mm
-
- 6316 ZZ bearing
- Single row deep groove ball bearing with two metal shields 80mm inside
-
- 6228 bearing
- Single row deep groove ball bearing 6228 without shields 140mm inside x
-
- 6088 bearing
- Single row deep groove ball bearing 6088 without shields 440mm inside x