579097 Bore 447.675 Mm, Tapered Roller Bearings, Double Row, Inch Dimensions, Machined Steel Cages
The 579097 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 579097 bearing is a Tapered Roller Bearings, double row, in inch dimensions O-arrangement with an inner diameter of 447.675 mm , an outer diameter of 635 mm, a width of 257.175 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 10600000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
579097 bearings ( 447.675 mm x 635 mm x 257.175 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 579097 |
| Interchangeable | FAG 579097 |
| Desgin Figure | 3 |
| Cage | machined steel cages - pin type |
| Arrangement | back-to-back (<>) |
| Seal | Open |
| Bearing Type | Tapered Roller Bearings, double row, in inch dimensions O-arrangement |
| Design type | TDO |
| Bearing Weight [lb] | 553.355 |
| d φ Inside [inch] | 17.625 |
| D Φ Outside [inch] | 25.000 |
| T Cone [inch] | 10.125 |
| C Cup [inch] | 8.125 |
| rs min Chamfer Cup | 1.5 mm |
| r1s min Chamfer Cone | 6.4 mm |
| C0r Radial Static [lbf] | 2382880 |
| Cr Radial Dynamic ISO 281 [lbf] | 966640 |
| Cr90 Equivalent load rating [lbf] | 285496 |
| Ca90 Equivalent load rating [lbf] | 91044 |
| Factor | |
| e | 0.33 |
| K Thrust factor | 1.79 |
Share this product to:
Let more people see your product
