534196 Bore 710 Mm, Deep Groove Ball Bearings For Rolling Mills, Solid Brass Cage
The 534196 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 534196 bearing is a Deep Groove Ball Bearings for Rolling Mills with an inner diameter of 710 mm , an outer diameter of 1030 mm, a width of 140 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial, Its dynamic radial rated load is approximately 1020000 N, its static radial rated load is approximately 2320000 N. It uses C4 standard radial clearance, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
534196 bearings ( 710 mm x 1030 mm x 140 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 534196 |
| Interchangeable | FAG 534196 |
| Cage | Solid brass cage, ball-guided |
| Radial internal clearance | C4 |
| Seal | Open |
| Bearing Type | Deep Groove Ball Bearings for Rolling Mills |
| Other | retaining groove in the outer ring |
| Bearing Weight [lb] | 868.612 |
| d φ Inside [inch] | 27.953 |
| D Φ Outside [inch] | 40.551 |
| B Width [inch] | 5.512 |
| rs min Chamfer | 7.5 mm |
| Cr Radial Dynamic [lbf] | 229296 |
| C0r Radial Static [lbf] | 521536 |
| D1 min [inch] | 29.055 |
| D3 max [inch] | 39.449 |
| rg max Fillet radius [inch] | 0.236 |
| f0 | 16.0 |
Share this product to:
Let more people see your product
