532828 Bore 710 Mm, Tapered Roller Bearings, Double Row For Loose Fit On The Roll Neck, Machined Steel Cages
The 532828 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 532828 bearing is a Tapered Roller Bearings, double row for loose fit on the roll neck with an inner diameter of 710 mm , an outer diameter of 900 mm, a width of 197 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 13400000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
532828 bearings ( 710 mm x 900 mm x 197 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 532828 |
| Interchangeable | FAG 532828 |
| Desgin Figure | 3 |
| Cage | machined steel cages - pin type |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Bearings, double row for loose fit on the roll neck |
| Design type | TDI |
| Bearing Weight [lb] | 705.472 |
| d φ Inside [inch] | 27.953 |
| D Φ Outside [inch] | 35.433 |
| B Width [inch] | 7.756 |
| Bi Width [inch] | 7.756 |
| rs min Chamfer Cup | 6.4 mm |
| r1s min Chamfer Cone | 3.3 mm |
| C0r Radial Static [lbf] | 3012320 |
| Cr Radial Dynamic ISO 281 [lbf] | 1011600 |
| Cr Radial Dynamic (value for housings with angular freedom) [lbf] | 1191440 |
| Cr90 Equivalent load rating [lbf] | 296736 |
| Ca90 Equivalent load rating [lbf] | 101160 |
| Factor | |
| e | 0.35 |
| K Thrust factor | 1.68 |
Share this product to:
Let more people see your product
