531296A Bore 305.08 Mm, Tapered Roller Thrust Bearings, Double Row For Oil Film Bearings
The 531296A Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 531296A bearing is a Tapered Roller Thrust Bearings, double row for oil film bearings with an inner diameter of 305.08 mm , an outer diameter of 500 mm, a width of 200 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, Its dynamic radial rated load is approximately 2240000 N, its static radial rated load is approximately 4650000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
531296A bearings ( 305.08 mm x 500 mm x 200 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 531296A |
| Interchangeable | FAG 531296A |
| Desgin Figure | 5 |
| Cage | Stamping steel cage |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings, double row for oil film bearings |
| Bearing Weight [lb] | 315.258 |
| d φ Inside [inch] | 12.011 |
| D Φ Outside [inch] | 19.685 |
| B Width [inch] | 7.874 |
| Bi Width [inch] | 7.874 |
| rs min Chamfer Cup | 6 mm |
| r1s min Chamfer Cone | 6 mm |
| Cr Radial Dynamic [lbf] | 503552 |
| C0r Radial Static [lbf] | 1045320 |
| Y | 1.16 |
Share this product to:
Let more people see your product
