531295A Bore 400 Mm, Tapered Roller Thrust Bearings, Double Row For Oil Film Bearings
The 531295A Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 531295A bearing is a Tapered Roller Thrust Bearings, double row for oil film bearings with an inner diameter of 400 mm , an outer diameter of 650 mm, a width of 240 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, Its dynamic radial rated load is approximately 3450000 N, its static radial rated load is approximately 6950000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
531295A bearings ( 400 mm x 650 mm x 240 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 531295A |
| Interchangeable | FAG 531295A |
| Desgin Figure | 5 |
| Cage | Stamping steel cage |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings, double row for oil film bearings |
| Bearing Weight [lb] | 615.083 |
| d φ Inside [inch] | 15.748 |
| D Φ Outside [inch] | 25.591 |
| B Width [inch] | 9.449 |
| Bi Width [inch] | 9.449 |
| rs min Chamfer Cup | 6 mm |
| r1s min Chamfer Cone | 6 mm |
| Cr Radial Dynamic [lbf] | 775560 |
| C0r Radial Static [lbf] | 1562360 |
| Y | 1.16 |
Share this product to:
Let more people see your product
