579708 Bore 260 Mm, Tapered Roller Bearings, Double Row For Vertical Rolls In Universal Roll Stands
The 579708 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 579708 bearing is a Tapered Roller Bearings, double row for vertical rolls in universal roll stands with an inner diameter of 260 mm , an outer diameter of 400 mm, a width of 194 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 4250000 N. both sides type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
579708 bearings ( 260 mm x 400 mm x 194 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 579708 |
| Interchangeable | FAG 579708 |
| Desgin Figure | 1 |
| Cage | Stamping steel cage |
| Arrangement | back-to-back (<>) |
| Seal | both sides |
| Bearing Type | Tapered Roller Bearings, double row for vertical rolls in universal roll stands |
| Other | spacer on both sides |
| Bearing Weight [lb] | 185.186 |
| d φ Inside [inch] | 10.236 |
| D Φ Outside [inch] | 15.748 |
| T Cone [inch] | 7.638 |
| C Cup [inch] | 5.905 |
| B1 [inch] | 8.031 |
| rs min Chamfer Cup | 1 mm |
| r1s min Chamfer Cone | 3 mm |
| C0r Radial Static [lbf] | 955400 |
| Cr Radial Dynamic ISO 281 [lbf] | 433864 |
| Cr Radial Dynamic (value for housings with angular freedom) [lbf] | 503552 |
| Factor | |
| e | 0.43 |
Share this product to:
Let more people see your product
