525155 Bore 482.651 Mm, Tapered Roller Thrust Bearings, Double Row For Oil Film Bearings, Machined Steel Cages - Pin Type
The 525155 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 525155 bearing is a Tapered Roller Thrust Bearings, double row for oil film bearings with an inner diameter of 482.651 mm , an outer diameter of 733.501 mm, a width of 200 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, Its dynamic radial rated load is approximately 3000000 N, its static radial rated load is approximately 6550000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
525155 bearings ( 482.651 mm x 733.501 mm x 200 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 525155 |
| Interchangeable | FAG 525155 |
| Desgin Figure | 2 |
| Cage | machined steel cages - pin type |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings, double row for oil film bearings |
| Bearing Weight [lb] | 617.288 |
| d φ Inside [inch] | 19.002 |
| D Φ Outside [inch] | 28.878 |
| B Width [inch] | 7.874 |
| Bi Width [inch] | 7.874 |
| rs min Chamfer Cup | 6.4 mm |
| r1s min Chamfer Cone | 6.4 mm |
| Cr Radial Dynamic [lbf] | 674400 |
| C0r Radial Static [lbf] | 1472440 |
| Y | 1.01 |
Share this product to:
Let more people see your product
