524209A Bore 510 Mm, Tapered Roller Thrust Bearings, Double Row For Oil Film Bearings, Pin-type Cages
The 524209A Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 524209A bearing is a Tapered Roller Thrust Bearings, double row for oil film bearings with an inner diameter of 510 mm , an outer diameter of 733.5 mm, a width of 200.025 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, Its dynamic radial rated load is approximately 3200000 N, its static radial rated load is approximately 8500000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
524209A bearings ( 510 mm x 733.5 mm x 200.025 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 524209A |
| Interchangeable | FAG 524209A |
| Desgin Figure | 3 |
| Cage | pin-type cages |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings, double row for oil film bearings |
| Bearing Weight [lb] | 593.037 |
| d φ Inside [inch] | 20.079 |
| D Φ Outside [inch] | 28.878 |
| B Width [inch] | 7.875 |
| Bi Width [inch] | 7.875 |
| rs min Chamfer Cup | 4.8 mm |
| r1s min Chamfer Cone | 3.3 mm |
| Cr Radial Dynamic [lbf] | 719360 |
| C0r Radial Static [lbf] | 1910800 |
| Y | 1.07 |
Share this product to:
Let more people see your product
