522008 Bore 350 Mm, Tapered Roller Thrust Bearings Double Acting, With Spacer, Brass Cage
The 522008 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 522008 bearing is a Tapered Roller Thrust Bearings double acting, with spacer with an inner diameter of 350 mm , an outer diameter of 540 mm, a width of 135 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears axial, Its dynamic radial rated load is approximately 1800000 N, its static radial rated load is approximately 10400000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
522008 bearings ( 350 mm x 540 mm x 135 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 522008 |
| Interchangeable | FAG 522008 |
| Cage | brass cage |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings double acting, with spacer |
| Bearing Weight [lb] | 233.688 |
| dw Inside [inch] | 13.780 |
| dg [inch] | 15.748 |
| Dg Outside [inch] | 21.260 |
| Sw [inch] | 1.181 |
| H Height [inch] | 5.315 |
| rs min Chamfer | 3 mm |
| r1s min Chamfer | 1 mm |
| Cr Radial Dynamic [lbf] | 404640 |
| C0r Radial Static [lbf] | 2337920 |
| D4 max [inch] | 15.157 |
| rg max Fillet radius [inch] | 0.098 |
| rg1 max Fillet radius [inch] | 0.039 |
Share this product to:
Let more people see your product
