515196 Bore 550 Mm, Tapered Roller Thrust Bearings Double Acting, With Spacer, Brass Cage
The 515196 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 515196 bearing is a Tapered Roller Thrust Bearings double acting, with spacer with an inner diameter of 550 mm , an outer diameter of 760 mm, a width of 230 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears axial, Its dynamic radial rated load is approximately 3200000 N, its static radial rated load is approximately 16300000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
515196 bearings ( 550 mm x 760 mm x 230 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 515196 |
| Interchangeable | FAG 515196 |
| Cage | brass cage |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings double acting, with spacer |
| Other | retaining groove in shaft washer |
| Bearing Weight [lb] | 652.562 |
| dw Inside [inch] | 21.654 |
| dg [inch] | 24.016 |
| Dg Outside [inch] | 29.921 |
| Sw [inch] | 1.969 |
| H Height [inch] | 9.055 |
| rs min Chamfer | 5 mm |
| r1s min Chamfer | 2 mm |
| Cr Radial Dynamic [lbf] | 719360 |
| C0r Radial Static [lbf] | 3664240 |
| D4 max [inch] | 22.874 |
| rg max Fillet radius [inch] | 0.157 |
| rg1 max Fillet radius [inch] | 0.079 |
Share this product to:
Let more people see your product
