511746 Bore 530 Mm, Tapered Roller Thrust Bearings Double Acting, With Spacer, Brass Cage
The 511746 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 511746 bearing is a Tapered Roller Thrust Bearings double acting, with spacer with an inner diameter of 530 mm , an outer diameter of 710 mm, a width of 218 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears axial, Its dynamic radial rated load is approximately 2700000 N, its static radial rated load is approximately 14000000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
511746 bearings ( 530 mm x 710 mm x 218 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 511746 |
| Interchangeable | FAG 511746 |
| Cage | brass cage |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings double acting, with spacer |
| Other | retaining groove in shaft washer |
| Bearing Weight [lb] | 518.081 |
| dw Inside [inch] | 20.866 |
| dg [inch] | 22.638 |
| Dg Outside [inch] | 27.953 |
| Sw [inch] | 2.244 |
| H Height [inch] | 8.583 |
| rs min Chamfer | 5 mm |
| r1s min Chamfer | 2 mm |
| Cr Radial Dynamic [lbf] | 606960 |
| C0r Radial Static [lbf] | 3147200 |
| D4 max [inch] | 21.850 |
| rg max Fillet radius [inch] | 0.157 |
| rg1 max Fillet radius [inch] | 0.079 |
Share this product to:
Let more people see your product
