513401 Bore 450 Mm, Tapered Roller Thrust Bearings Double Acting, With Spacer, Brass Cage
The 513401 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 513401 bearing is a Tapered Roller Thrust Bearings double acting, with spacer with an inner diameter of 450 mm , an outer diameter of 645 mm, a width of 155 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears axial, Its dynamic radial rated load is approximately 2240000 N, its static radial rated load is approximately 12700000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
513401 bearings ( 450 mm x 645 mm x 155 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 513401 |
| Interchangeable | FAG 513401 |
| Cage | brass cage |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings double acting, with spacer |
| Other | retaining groove in shaft washer |
| Bearing Weight [lb] | 330.690 |
| dw Inside [inch] | 17.716 |
| dg [inch] | 19.685 |
| Dg Outside [inch] | 25.394 |
| Sw [inch] | 1.496 |
| H Height [inch] | 6.102 |
| rs min Chamfer | 5 mm |
| r1s min Chamfer | 3 mm |
| Cr Radial Dynamic [lbf] | 503552 |
| C0r Radial Static [lbf] | 2854960 |
| D4 max [inch] | 18.898 |
| rg max Fillet radius [inch] | 0.157 |
| rg1 max Fillet radius [inch] | 0.098 |
Share this product to:
Let more people see your product
