51136M Bearing
The 51136M bearing is a Thrust Ball Bearings with an inner diameter of 180 mm , an outer diameter of 225 mm, a width of 34 mm. It typically uses p5 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
thrust ball bearings 51136M
This type of bearing is separable, which can only carry axial load.
The single direction bearing can take axial load in one direction, while the double can carry altering axial load in either direction.
Before using, they have to be preloaded.
They are used in lathe centers, automobile clutches, reducers and so on.
Thrust ball bearings can support high axial forces but must not be subjected to radial loads, single and double direction designs available.
Features :
Thrust ball bearings consist of two precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads.Thrust ball bearings can handle loads in the axial direction only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the housing are called housing washers. Both washers contain raceways for the balls.Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve.Care must be taken in handling to prevent damage to the separable rings and ball assemblies.
Catalog :
Single direction thrust ball bearings
Double direction thrust ball bearings
Share this product to:
Let more people see your product
-
- 51136M bearing
- thrust ball bearing 51136M 1.satisfactory of qulity,service and price 2.5% discount for order
-
- 6412 bearing
- Produce the diameter from 3mm-1500mm single row deep groove ball bearings 10mm