32010 Bearing 50x80x20.0mm

🔍

32010

Bore Diameter:50 mm

Outside Diameter:80 mm

Width:20.0 mm

Weight:0.366 kg

The 32010 bearing is a taper roller bearing with an inner diameter of 50 mm , an outer diameter of 80 mm, a width of 20.0 mm. It typically uses P0,P4,P5,P6 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

50 mm

Outside Diameter:

80 mm

Thickness:

20.0 mm

Weight:

0.366 KG

Specifications:

Structure:

taper roller

Brand:

CNJX

Precision Rating:

P0,P4,P5,P6

Bearing Material:

chrome steel ,GCR15

Seals Type:

open

Transaction Information:

Payment term:

T/T

Delivery time:

within 25 days

Detailed description

Series: taper roller bearing

Brand: CNJX

Bearing type: 32010 bearing

Inner: 50mm

Outside diameter: 80mm

Thickness: 20.0mm

Product Description

About the tapered roller bearings

Tapered roller bearings can be separated by the inner ring and roller, maintains a together make up components and outer ring can be installed separately. Roller and roll the contact point of the fixed way contact wires can reduce stress concentration.

Tapered roller bearings can withstand the big radial direction load and the axial load. Due to the circular cone roller bearings can only transfer one-way axial load, therefore, to transfer the opposite direction of the axial load will need another with the installation of symmetric circular cone roller bearings. Tapered roller bearings is the largest amount of single row circular cone roller bearings. In the front of the car wheel, recent years have used the small size of the double row circular cone roller bearings. Four row circular cone roller bearings used in large cold, ReGaJi and other heavy machine.

Features of Tapered Roller Bearings:

Single-row tapered roller bearings have an outer ring, and an inner ring assembly consisting of an inner ring and a group of tapered rollers embraced by the basket-shaped cage. The outer ring(cup) is separable from the inner ring assembly. According to standardized dimensions of tapered roller bearing specified by ISO, the outer ring or inner ring assembly of any tapered roller bearing with standardized dimension could make international exchange with the outer ring or inner ring assembly of the same series. That is to say, besides external dimensions, tolerances shall be in accordance with the provisions of the ISO492 (GB307), the cone angle of the inner ring assembly and cone diameter of assembly must also comply with the relevant provisions of the exchange.

Generally, when cone angle of outer ring raceway of single-row tapered roller bearings is from 10°to 19°, they could withstand axial loads and radial loads spontaneously. The big the cone angle, the larger the axial loads carrying capacity. Large-sized tapered roller bearings with post code plus B, the cone angle is from 25° to 29°, they carry large axial loads. In addition, single-row tapered roller bearings have the ability to adjust clearance during installation. The inner ring (or outer ring) of double row tapered roller bearings is a whole part. The small end face between two inner rings (or outer rings) is similar, there is one middle spacer ring between two inner rings, and the clearance is adjusted by thickness of spacer ring, which can also be used for adjusting the pre-interference of double row tapered roller bearings.

Share this product to:

Let more people see your product

How can you buy 32010 Bearing 50x80x20.0mm on the Internet?
High quality 32010 ( 0.366 kg Mass, ID: 50 mm OD: 80 mm WD: 20.0 mm , P0,P4,P5,P6 Accuracy Class , chrome steel ,GCR15 Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. 32010. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- 30308 bearing 40x90x25.25mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30308 bearing Inner: 40mm Outside diameter: 90mm Thickness: 25.25mm
- 32008 bearing 40x68x19.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32008 bearing Inner: 40mm Outside diameter: 68mm Thickness:19.0mm
- 30209 bearing 45x85x20.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30209 bearing Inner: 45mm Outside diameter: 85mm Thickness: 20.75mm
- 32004 bearing 20x42x15.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32004 bearing Inner: 20mm Outside diameter: 42mm Thickness:15.0mm
- 6801-2Z bearing 12x21x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:12mm Outer diameter:21mm Width:5mm Weight :0.006kg
- 6905-2Z bearing 25x42x9mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:42mm Width:9mm Weight :0.042kg
- 696-2RS bearing 6x15x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:6mm Outer diameter:15mm Width:5mm Weight :0.0038kg
- 6312-2RS bearing 60x130x31mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:130mm Width:31mm Weight :1.67kg

32010 Bearing 50x80x20.0mm

32010 Related Products »

Product Groups

Information

Category