32008 Bearing 40x68x19.0mm

🔍

32008

Bore Diameter:40 mm

Outside Diameter:68 mm

Width:19.0 mm

Weight:0.267 kg

The 32008 bearing is a taper roller bearing with an inner diameter of 40 mm , an outer diameter of 68 mm, a width of 19.0 mm. It typically uses P0,P4,P5,P6 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

40 mm

Outside Diameter:

68 mm

Thickness:

19.0 mm

Weight:

0.267 KG

Specifications:

Structure:

taper roller

Brand:

CNJX

Precision Rating:

P0,P4,P5,P6

Bearing Material:

chrome steel ,GCR15

Seals Type:

open

Transaction Information:

Payment term:

T/T

Delivery time:

within 25 days

Detailed description

Series: taper roller bearing

Brand: CNJX

Bearing type: 32008 bearing

Inner: 40mm

Outside diameter: 68mm

Thickness: 19.0mm

Product Description

About the tapered roller bearings

Tapered roller bearings can be separated by the inner ring and roller, maintains a together make up components and outer ring can be installed separately. Roller and roll the contact point of the fixed way contact wires can reduce stress concentration.

Tapered roller bearings can withstand the big radial direction load and the axial load. Due to the circular cone roller bearings can only transfer one-way axial load, therefore, to transfer the opposite direction of the axial load will need another with the installation of symmetric circular cone roller bearings. Tapered roller bearings is the largest amount of single row circular cone roller bearings. In the front of the car wheel, recent years have used the small size of the double row circular cone roller bearings. Four row circular cone roller bearings used in large cold, ReGaJi and other heavy machine.

Features of Tapered Roller Bearings:

Single-row tapered roller bearings have an outer ring, and an inner ring assembly consisting of an inner ring and a group of tapered rollers embraced by the basket-shaped cage. The outer ring(cup) is separable from the inner ring assembly. According to standardized dimensions of tapered roller bearing specified by ISO, the outer ring or inner ring assembly of any tapered roller bearing with standardized dimension could make international exchange with the outer ring or inner ring assembly of the same series. That is to say, besides external dimensions, tolerances shall be in accordance with the provisions of the ISO492 (GB307), the cone angle of the inner ring assembly and cone diameter of assembly must also comply with the relevant provisions of the exchange.

Generally, when cone angle of outer ring raceway of single-row tapered roller bearings is from 10°to 19°, they could withstand axial loads and radial loads spontaneously. The big the cone angle, the larger the axial loads carrying capacity. Large-sized tapered roller bearings with post code plus B, the cone angle is from 25° to 29°, they carry large axial loads. In addition, single-row tapered roller bearings have the ability to adjust clearance during installation. The inner ring (or outer ring) of double row tapered roller bearings is a whole part. The small end face between two inner rings (or outer rings) is similar, there is one middle spacer ring between two inner rings, and the clearance is adjusted by thickness of spacer ring, which can also be used for adjusting the pre-interference of double row tapered roller bearings.

Share this product to:

Let more people see your product

How can you buy 32008 Bearing 40x68x19.0mm on the Internet?
High quality 32008 ( 0.267 kg Mass, ID: 40 mm OD: 68 mm WD: 19.0 mm , P0,P4,P5,P6 Accuracy Class , chrome steel ,GCR15 Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. 32008. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- 32010 bearing 50x80x20.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32010 bearing Inner: 50mm Outside diameter: 80mm Thickness:20.0mm
- 32306 bearing 30x72x28.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32306 bearing Inner: 30mm Outside diameter: 72mm Thickness:
- 32007 bearing 35x62x18.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32007 bearing Inner: 35mm Outside diameter: 62mm Thickness:18.0mm
- 32311 bearing 55x120x45.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32311 bearing Inner: 55mm Outside diameter: 120mm Thickness: 45.5mm
- 32311 bearing 55x120x45.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32311 bearing Inner: 55mm Outside diameter: 120mm Thickness: 45.5mm
- 6313-2RS bearing 65x140x33mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:140mm Width:33mm Weight :2.08kg
- 6802-2Z bearing 14x24x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:15mm Outer diameter:24mm Width:5mm Weight :0.005kg
- 6801 bearing
- Bearing Type:Deep groove ball bearing Inner Diameter:12mm Outer diameter:21mm Width:5mm Weight :0.006kg

32008 Bearing 40x68x19.0mm

32008 Related Products »

Product Groups

Information

Category