30307 Bearing 35x80x22.75mm

🔍

30307

Bore Diameter:35 mm

Outside Diameter:80 mm

Width:22.75 mm

Weight:0.515 kg

The 30307 bearing is a taper roller bearing with an inner diameter of 35 mm , an outer diameter of 80 mm, a width of 22.75 mm. It typically uses P0,P4,P5,P6 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

35 mm

Outside Diameter:

80 mm

Thickness:

22.75 mm

Weight:

0.515 KG

Specifications:

Structure:

taper roller

Brand:

CNJX

Precision Rating:

P0,P4,P5,P6

Bearing Material:

chrome steel ,GCR15

Seals Type:

open

Transaction Information:

Payment term:

T/T

Delivery time:

within 25 days

Detailed description

Series: taper roller bearing

Brand: CNJX

Bearing type: 30307 bearing

Inner: 35mm

Outside diameter: 80mm

Thickness: 22.75mm

Product Description

About the tapered roller bearings

Tapered roller bearings can be separated by the inner ring and roller, maintains a together make up components and outer ring can be installed separately. Roller and roll the contact point of the fixed way contact wires can reduce stress concentration.

Tapered roller bearings can withstand the big radial direction load and the axial load. Due to the circular cone roller bearings can only transfer one-way axial load, therefore, to transfer the opposite direction of the axial load will need another with the installation of symmetric circular cone roller bearings. Tapered roller bearings is the largest amount of single row circular cone roller bearings. In the front of the car wheel, recent years have used the small size of the double row circular cone roller bearings. Four row circular cone roller bearings used in large cold, ReGaJi and other heavy machine.

Features of Tapered Roller Bearings:

Single-row tapered roller bearings have an outer ring, and an inner ring assembly consisting of an inner ring and a group of tapered rollers embraced by the basket-shaped cage. The outer ring(cup) is separable from the inner ring assembly. According to standardized dimensions of tapered roller bearing specified by ISO, the outer ring or inner ring assembly of any tapered roller bearing with standardized dimension could make international exchange with the outer ring or inner ring assembly of the same series. That is to say, besides external dimensions, tolerances shall be in accordance with the provisions of the ISO492 (GB307), the cone angle of the inner ring assembly and cone diameter of assembly must also comply with the relevant provisions of the exchange.

Generally, when cone angle of outer ring raceway of single-row tapered roller bearings is from 10°to 19°, they could withstand axial loads and radial loads spontaneously. The big the cone angle, the larger the axial loads carrying capacity. Large-sized tapered roller bearings with post code plus B, the cone angle is from 25° to 29°, they carry large axial loads. In addition, single-row tapered roller bearings have the ability to adjust clearance during installation. The inner ring (or outer ring) of double row tapered roller bearings is a whole part. The small end face between two inner rings (or outer rings) is similar, there is one middle spacer ring between two inner rings, and the clearance is adjusted by thickness of spacer ring, which can also be used for adjusting the pre-interference of double row tapered roller bearings.

Share this product to:

Let more people see your product

How can you buy 30307 Bearing 35x80x22.75mm on the Internet?
High quality 30307 ( 0.515 kg Mass, ID: 35 mm OD: 80 mm WD: 22.75 mm , P0,P4,P5,P6 Accuracy Class , chrome steel ,GCR15 Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. 30307. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- 32311 bearing 55x120x45.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32311 bearing Inner: 55mm Outside diameter: 120mm Thickness: 45.5mm
- 30306 bearing 30x72x20.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30306 bearing Inner: 30mm Outside diameter: 72mm Thickness: 20.75mm
- 30204 bearing 20x47x15.25mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30204 bearing Inner: 20mm Outside diameter: 47mm Thickness: 15.25mm
- 32307 bearing 35x80x32.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32307 bearing Inner: 35mm Outside diameter: 80mm Thickness: 32.75mm
- 6205-2Z bearing 25x52x15mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:52mm Width:15mm Weight :0.120kg
- 6810-2RS bearing 50x65x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:65mm Width:7mm Weight :0.052kg
- 6307 bearing 35x80x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:80mm Width:21mm Weight :0.457kg
- 6907 bearing 35x55x10mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:55mm Width:10mm Weight :0.074kg

30307 Bearing 35x80x22.75mm

30307 Related Products »

Product Groups

Information

Category